Discussion Locked

Chime in about Windows XP

0 helpful
140 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

This is the sixth discussion thread of our ongoing Windows XP discussion, where you can post your Windows XP questions, enter comments about our weekly Windows XP e-newsletter, and offer suggestions for future tips.

Paste the following URLs into a browser to check out our previous discussions. (Please remove any superfluous spaces in the URLs when you copy and paste these links.)

* https://www.techrepublic.com.com/5208-6230-0.html?forumID=3&threadID=117982

* https://www.techrepublic.com.com/5208-6230-0.html?forumID=3&threadID=121870

* https://www.techrepublic.com.com/5208-6230-0.html?forumID=3&threadID=129256

* https://www.techrepublic.com.com/5208-6230-0.html?forumID=3&threadID=136732

* https://www.techrepublic.com.com/5208-6230-0.html?forumID=3&threadID=147136

If you haven't subscribed to our free weekly Windows XP e-newsletter, sign up today!
http://nl.com.com/acct_mgmt.jsp?brand=techrepublic

140 replies

by makeitso

I've tried this at home and at work and it doesn't work. I've tried quotes round the printer name. Has anybody got this to work?

by rrm_computer

When I boot XP there is a message that there is an invalid BOOT.INI file and it uses Windows to boot the system. There is no BOOT.INI in the root of the C drive. I've changed the View option to see all files included protected ones. I tried to setup a task which needs to examine the BOOT.INI and it tells me that it does not exist. This confirms that it is not present. Is this something that I can create using a utility or do I have to construct a file in the required format? I am using a hard disk that is partitioned C and E and only using XP on this notebook. Drive D is alloocated to the DVD/RW. TIA Lugia

by stephen_984

Are you dual booting with other operating system?From your explaination you have only one op in the system.That means boot.ini should not be present.You can type bootcfg/? in a command window to see other configuration help command.Bootcfg /repair might help you in recovery the corrupt boot.ini files if you have dual boot configuration. Or right click my computer,properties,advance,then navigate to system start -up and recovery to edit your boot.ini files.Another method is to place your win xp cd in your drive.When it starts,don,t choose the first Repair,go on as if you are installing a new op till the system discovers the already installed op.You will be asked if you want to repair. say yes!The Op will attempt to repair the corrupt boot.ini.Then restart your system.

by hal

A newbie is networking a XP Pro machine to a XP Home machine through a gateway router. Both machines can access the internet. Cable internet access connected to the router as well. The XP Pro machine looks to be working as I would expect with all the folders on the XP Home machine in the shared folder available in My Network Places. The Home machine however does not show the shared folders on the Pro machine and when I check the Windows Network both computers appear. When I click on the Pro machine I get a "\\Main is not accessible" error messages. Can see no reason why it shouldn't be accessible and I have tried all I can think to do to correct the situation. I would appreciate any suggestions.

by jdclar2

With the added security of the newer versions of Windows NT (2000, xp, etc.), if you're in a workgroup environment...
Create identical user/password accounts on BOTH machines and make sure shared folders can be accessed by that account.
Login as that user.
Problem fixed!

by hal

Your few words made my struggles seem like wasted effort, but I was struggling to save A LOT of configuration and setup on the new laptop. It would have seemed that going to the Control Panel then User Accounts and making a name change and that followed by a password change would have solved the problem, but no, someone somewhere decided that changing there would not change the "net user" configuration, which is the one that matters. Those two are the match required to make it all work.

Regardless, working now and your "words" got me on the right track, so thanks bunches.

Hal

by mmuggins11

Net User? Hmmmm. I've missed something. Duh - where is that.

I've also got ZoneAlarm Pro to contend with, and have put the 2 IP addresses in the trusted zone, but still not 'seeing' or 'talking' to one another. Any ideas?

by hal

Go to your C:\ screen and enter "net user" at the prompt. You enter the different world of Microsoft networks. Listed there should be the valid users recognized by the network system. If you then enter "net user NAME", where NAME is one of the valid users, the details of that particular user are listed. Yes it can be different than the User Accounts listing under that category in the Control Panel. I had a difference on the XP Home machine and until that was corrected so that all the machines used an account on the network that had the same User Name and Password as listed under Net User, they wouldn't talk to each other. Antivirus and Firewalls didn't seem to have any but the expected affects. Block the needed ports and they definitely won't connect. Works fine now. Thanks Microsoft.

by zzmagwheels

When installing ZoneAlarm it should ask if you want to use ICS and it must be turned on to share internet. Then the IP range for trusted network inputed. Also the network cards should be set to assign IP's automatically on remote computers but not on the server. Works for me but some versions of ZoneAlarm dont support ICS.

by chunder2

When I start XP Pro workstation, instead of opening at "desktop" it starts with "My Documents" open, closing is OK but an annoyance.
thanks

by larry huisingh

First, make sure you don't have a shortcut to your My Documents folder in your startup group (also use MSCONFIG's Startup tab to look for something similar saved elsewhere). Second, there is an option in Explorer that if turned on will "Restore previous folder windows at logon". This is located in Windows Explorer under Tools | Folder Options and the "View" tab.

by olsenbanden2

I have a Win XP Home, at home, and Win XP Pro. at work. How do I set up a VPN between them.(Have cable at home and DSL at work with a wireless router) I would like to be able to navigate from both computers, so that I could get files from the other computer. Regardles if I'm home or at work. I hope that it is possible.

by srolen

Check with your Network Admin @ work. There is a nearly 100% chance that "rogue" VPN's and stopped at the firewall. Mine are and never allowed due to security. Ask the Admin if they have another way to VPN into the Company network from home, then you can access your work client via Remote Desktop. This is the accepted and secure way to do this. This is how my network is configured.

by ron

Go to either of these locations for software to connect two computers over the internet. They are not free, but you can try them out for free.
www.01com.com
www.gotomypc.com
They will work behind corporate firewalls, unless specifically blocked.

by danie8

There used to be a way to tell Windows explorer to start up with a status bar and in folder view. I have found that you can still specify a directory to open, and the folder view is remembered from session to session, but how can I get the status bar to always be on.

by ustek

Open wE > View> check Status Bar;
then File>Close.
Now when youi open WE you'll have status bar

by danie8

Often when I start word the option to keep menus always expanded is lost. I am tired of changing it back and have the startup macro disabled for virus/hacker safety issues. How can I get teh option to be more permenent?

by hotcross

This is for office 2000 / word 2000 but is simular in the other versions of the other office products
Tools - Customize - Options - uncheck (Show full menus after a short delay & uncheck show recently used commands first)

Mikeee

by william

When browsing I get messages scripting error on the Windows Xp home but not on the Windows Xp pro?

Where do I turn off scripting?

by petremure

to turn off scripting error in ie, go to tools/ie options/advanced and check "disable script debugging" option. p.

by autosol

The first time I dialup I usually connect real slow 4 to 8kb, the second I try to connect XP reboots. I have ran Mcafee's stinger, norton utilities, several MS virus checker's and panda. there are no virus's. Lately I get a GPF sometimes and If left unattended, XP disconnects and reboots. Anyone know what's up.

by finge

Just redid one for same reason. Norton installed. Trojans & hijackers made it past. No Firewall was installed. I installed XP?s recovery console, scanned the drive (chkdsk /r). Ran a solid day hampered by corruption. Disabled Norton. Installed AVG Pro in Safe Mode, ran. Caught 3 Trojan Downloaders. Used ?HiJackThis? to kill Brower objects. Backed up data, reformatted and rebuilt XP. Installed ZoneAlarmPro, AVGPro7, Ad-Aware SE Pro, SpyBot, and SpyWareBlaster. Problem Solved.

by adeadekanmbi22

I am having problem saving web pages today and downloaded word documents refused to open. complained of lack of space. I still have plenty of harddisk space. What do I do?

by cyberjunkie21

Delete all of your temporary files. If you don't know where they're located go to start, run and type %temp%
It opens the folder the current user uses as the temporary directory, delete everything in there.
Second, open internet explorer, go to tools, internet options, and under the temporary internet files, click the delete files button.
That should take care of it...

by greeneyes

How do I keep thumbnails from cutomising themselves in XP Home? When looking through lists of files I prefer to use the Thumbnail view ans some of these I have cutomized. Those that I did not customise I want to stay that way but they won't.

by mpasaa

So far, I am not impressed. Quite frankly, it seems to be just another "bloated" OS with more bells and whistles than any of us will ever use or need. Same goes for Office 2003!! Their nice interfaces but SO WHAT?

I think Microsoft gives the average user base way too much credit. There are far too many areas that require expert knowledge and the average PC user simply isn't that comfortable with nor experienced enough in computers to handle. We, as adminstrators, take much of this for granted and laugh at users who cannot even use a mouse without difficulty. But the sad fact is, if the OS develops problems or needs rebuilding who's going to do it--a home user??--what world is Microsoft living in?? Even their recovery utilities and recovery modes require a little more knowledge than imply selecting an item from a menu (hence the myriad of 3rd party recovery tools out there).

It's great because it keeps me employed but in terms of these OSes, which this forum is asking about, I think XP is overly complex (underneath) for no reason.

Win2k/XP are definitely better than the flaky Win 9.x OSes in terms of stability which makes my job as Network Administrator more manageable. Before these OSes I had to fill my days troubleshooting DLL issues and General protection Faults and constantly rebuild desktops to get them functioning again. It's nice to NOT have to do that anymore.

That said, I don't think we are getting anything better in the XP platform other than some utilities that were always available from 3rd parties or resource kit tools. Nowadays, most of those seem to have been deemed security risks and are often disabled or not used in our high secure environments anyway.

I wish Microsoft would focus on the little things like loadable modules for services and applications that won't require server rebooting (similar to Netware NLMs); more intuitive Office applications that can do things like mail merge without having to go through a dozen steps, etc. These are the areas where Microsoft could improve to assist the user community and ultimately the administrators out there.

XP? I guess it's O.K. but then we all know a new OS is always on the horizon....MS seems to just dribble out new features in each OS version and then acts like these features are newly discovered....

It's hard to NOT use this OS when it is the king of the hill right now. Guess we all have to just tweak the OS as best we can and hope it remains secure and usable at the same time....enjoy!

by sgt1035

I ran ME in my main computer for years without nary a hitch. The occasional problem was easy to handle. Then I got a 'backdoor'. After reformatting my boot partition, I made the grave error of installing XP.

I've been miserable ever since. Bloat? What used to fit nicely (OS) on a 10g partition with lots of room, now cannot breathe. AND SLOW! I've 'tweaked' til I'm blue in the face, and I'm unable to, appreciably, speed it up. ME, on the very same system, was so much faster.

It almost felt like I'd gone back to a 386 with XP installed...

There is nothing that XP gives me that ME didn't (except many more problems)...but, unfortunately, there's no going back.

I yearn for the days when I so enjoyed my computer. XP robbed me of that pleasure!

by Greg Shultz

You don't mention any system specs other than having a 10GB hard disk.

Adding more RAM will definitely allow XP to run better/faster.

Did you use the NTFS file system when you formatted your hard disk?

If so, you could take advantage of NTFS Compression to decrease the amount of hard disk space that rarely used/accessed data files occupy.

by txtopgun

Sure you can...simply remove the NTFS partition and then recreate your FAT32 partition, reformat, and reload. Piece of cake unless you really don't hate XP as much as you say you do.

by kieseyhow

I find XP to be faster, more stable and intuitive compared to Win98. It is nicer than win2000 and I like the way you can almost limitlessly customize it. If you know how.

You need a lot of RAM for XP; more than it needs just because of the fact it has a fatter GUI. XP uses various protected memory spaces, and has features that unload and preload data to RAM. You need to give it room to breathe or it will work as well as you trying to lift something that you're standing on.

Once you pass a cetain amount of RAM (imo 384k), you will notice a dramatic increase in speed. Also, are you using outdated or cheapo hardware? XP utilizes modern advances that have been made in physical architecture and CPU features to make everything just "work better" ... those old computers simply do not have the circuitboard wiring and memory paths to allow XP to work properly. Think of a top notch surgical team, trying to do brain surgery in someone's crawl space... *grins*

Remember, that just because new software comes out, doesn't mean the old hardware can use it. Likely, your XP is really trying it's very best to "live" in that old box you have... but please, think what you would do if you had to go back to a handpump and outdoor latrine and tallow candles to work and live by... *grins*

by sgt1035

Sorry guys...was simply commenting and didn't include my info. Briefly...

Amd 2300
1 gig memory
200 gigs hard drive space-partitioned (120 + 80 WD)
500 Power supply

Been building, restoring, repairing systems since 1983.

All the above is more than sufficient for a smooth running system. Should have included this info sooner. Any comments?

by softcorp.us

Windows XP is a much better system than Windows ME. In my experience, Windows XP is slower than Window 98/ME on the same hardware. It's the tradeoff for a more stable system. Windows XP does demand more from PC hardware than Windows 98/ME. However, your PC hardware should give you a speedy Windows XP system. Memory is the key to speed on XP, but you have plenty.

- Be sure you install XP on a 7200 RPM drive, preferably with high recording density and 8MB buffer. This provides quicker random access and faster data transfer. This is especially important when your system does virtual memory paging. An older 5400 RPM drive will slow the system down noticeably.

- Defragment your hard drive. This can make a big difference also. Be sure to backup first... :-)

- Be sure the partition where XP is installed is not nearly full. Be generous with your amazingly inexpensive disk space.

- If your Windows XP system still seems very slow, you may have a driver problem (just a guess). On your hardware, Windows XP should not seem very slow. But, "slower than ME" would be expected.

Good luck!

-----Steve Jackson

CEO, Software Corporation (Softcorp)

by ludedude25

MS min requirements are a joke, 233mhz, 64mb ram, 1.5gb hd? Ha.

Even their recommended 300mhz ob, 128mb, ob, 1.5 ob is a joke.

I think they should make their employees at MS use the min specs for 6 months before they deciede something that rediculous.

My first suggestion to anyone even remotely considering XP is check the motherboard and other hardware for drivers made for xp. Don't settle for XP Default drivers your askin for something slow.

What would I recommend XP on?

Mabey min as a Pentium 2 500mhz or equivelant, 256MB ram, 30 gig hd perfer ata 100/133 7200rpm with 8 mb video. << Makes a good computer for general web use and office programs for the casual user.

Comfortable install 1Ghz of faster CPU, 512MB PC133 or DDR Ram, 40 to 80 gig hd, 32MB AGP video.

If you don't have 256MB of RAM or more don't waste your time, it will not satisfy you as an OS.

Again if you have a HP, Compaq, Gateway, Dell, or other manufactured pc check first to make sure they have drivers for that model.

I have seen many XP computers with 128MB ram! What a joke. Half the time it's running on pagefile! No wonder it's slow. I usually just add another 256 to make it 384MB and it will run like a dream.

Plus I do some msconfig work removing junk from startup, weekly disc cleanups, and depending on use monthly defrags.

If your doin a fresh install and gonna use IE put a antivirus, spyware progs, and a good firewall on it.

Firefox ++ May be a temporary solution but I have been adware/spyware free for 6 mos. using xp default firewall and AVG 7 also.

by srolen

The WPA files were part of the issue of re-building a client PC. New build? New SID! Where is the SID located so the PC can be given the same hostname without having to delete/add back into the domain?

by jim brubaker

I have tried 4 times for clients that seemless reinstall with the WPA files and it has failed--(there are a lot of people out there with two computers and one copy of xp)

I would like to hear someone say "I did it and it worked."

Just formating the drive changes the Vol label and thats one strike right there.

by ustek

SID can only be changed, you can not ASSIGN
same SID. It's windows nature.
whe you clone XP/2003/2000 you need to change SID if
they belong to a domain., but do not bother if you do not need to join a clone PC to a domain

by humbleopinion

The article "Keep your activation status intact when reinstalling XP" explains how to restore the WPA, but where is the MS Office activation stored, and how to restore it?

by Greg Shultz

Office XP: data.dat
Office 2003: opa11.dat

For both versions, these activation files are stored in the folder:

C:\Documents and Settings\All Users\Application Data\Microsoft\OFFICE\DATA

Keep in mind that Windows Explorer has to be configured to show Hidden files and folders - Tools|Folder Options|View|Advanced Settings

by hal

I did the XP SP2 update and all seemed to go flawlessly. Put a couple of days operation on the updated system with continued flawless operation. Decided the time had come for a new complete system backup and used Norton Ghost aimed at a detached USB2 harddrive which has been used numerous times with Win XP Pro SP1+ in this same backup process. Encountered an error termination in the Ghost imaging process and a blue screen STOP:0x0000008E error. Now, although the system launches and seems to operate well, the blue screen and error shows up every time in the shut down process at the point I would expect XP to powerdown the system.

I suspect the Ghost imaging process clobbered a critical Win XP file that needs to be reloaded, but I am not educated enough to determine which one and how to proceed. Can any one help? Microsoft support hasn't been able to so far and I cannot get through the Symantec maize to even ask for help.

by hal

Let me update this. After a bunch of dancing with Microsoft and a KB indication I needed to update my Graphics Driver (go figure?), I launched a selective startup analysis with various of the drivers and services disabled. Found that with Norton Antivirus disabled all seemed to work well except for the pesky cautions of operating without an antivirus program. Loaded a new download of CA's eTrust EZ Armor, activated and updated the virus protection and got the same blue screen stops at the same address. See thoughts that I had somehow clobbered a needed routine.

In frustration I restored a HD image just before the SP2 upgrade(?),updated all my work files and I'm back up and running. Ask when I will try the SP2 upgrade again?

by bagmaster50

Have you tried system restore? Also you can try this, put in the XP cd, cancel window that opens, open command prompt, type in the command "sfc /scannow". This will check your files integrity and replace corroupted files.

by iamamaverick

I have a Laptop with Win XP Home. I use it to connect to my office Server wihcih is Win 2000. After installing SP2, whenever I work outside Office without connecting to the server after I come back to office I have to reboot XP. It does not show local area connection icon in Network Connections also.

Before SP2 it used to connect immediately when I plug-in the Network Cable.

Anybody else facing this problem or having a solution.

by gshantz

Can anyone tell me why XP can't be installed on a newly formatted drive? Or has anyone experienced a similar dilema?

I had a system with multi-boot where drive C had Win 98 and XP put itself onto drive E. (D was appointed to the CD burner.) All hard drives were on a Raid controller, but not mirrored or striped. After several power glitches, XP became damaged (unknown to me) and suddenly was unable to perform an update. With the help of MS tech support, it was decided that I needed to do a system repair from the CD. Because of the multi-boot, and the Raid controller, I was unable to do a repair at all. Never having gone through the proceedure, I was a bit skittish anyway.

I made an image of my drive 1st thing, then cleared the C: drive and tried to force a drive letter change on my E: drive. XP wouldn't allow this at all, either with the 2 drives connected or with only the "E:" drive alone. With no boot info in C:, the only way I could boot at all, was with the XP CD in place. I tried to reinstall XP fresh on the C: drive but XP wouldn't even recognize a drive of any form. CMOS and the Raid controller saw it just fine. I even downloaded the newest Raid drivers.

In frustration, I copied the image of E: to the now empty drive "C:" and found it wouldn't boot either. (To keep this short, I'm skipping over the MANY different combinations of attempts to make this work.) I finally moved the drive "C:" to the IDE port and it finally "woke up". Keeping it the only drive connected, I was able to let XP repair this copy and happily found it to boot as drive C:. Of course I had to use Drive Mapper by PowerQuest a couple times and even WinDoctor by Norton System Suite to get everything pointing to C: instead of E: I also had to reinstall or repair several programs including MS Office XP.

My greatest consternation was NOT being able to install to a fresh drive whether it was unpartitioned, partitioned, formated with Fat 32 or NTFS. I have had XP see an unpartitioned drive before and it just set it up and kept going. NOT this time. It was totally unable to SEE the drive and would just shut down.

After a week of efforts, I am feeling real good about having my system back, but am really baffled about my experience. Any thoughts or comments would be helpful.

by edronex2

I also had a similar problem when trying to re-install XP..When it got to the licencing stage, it stopped installing. Still to work out whay or how to proceed with clean install. Any advice?

by randarac

1. Get into the setup. (Del at the beginning)
2. Set the your CD unit as 1st starting option.
3. Place your XP cd into de cdr unit.
4. Follow the instructions.

by ustek

1. you should've presed F6 (during CD boot right before it start loading files) to install you RAID controller driver from a floppy.
2. When you move an image from drive to drive either logical or pfysical you alsways must edit boot.ini file.
3.You also need to distinguish system and boot partitions in windows NT and higher.
4."My greatest consternation was NOT being able to install to a fresh drive " -it's because windows install did not find it because of your Raid Controller.

by capnpauly

In the 9/30/2004 edition of the 'Windows XP Tips at TechRepublic.com' the subject of the mailing was to create a shortcut to the Run command...well it doesn't work for me, and I didn't see that there needs to be any special options setup or anything...

EDIT: Nevermind - I just figured it out; you have to have the start menu set as the 'newer' style, not "Classic Start menu".
But in my defense, it wasn't mentioned in the e-mail that it had to be set that way... :p

by rtlinux

I agree, the author did fail to mention that he/she used the new start menu. I use the old style, as I feel that new design is garbage and too much of a resource hog, and could not get it to work either. I prefer function over form from an OS.

by soundy

Here's an even better idea (works best with lots of screen real estate, 1280x1024 or better):

Right-click the taskbar, go to Toolbars, and check Address: this adds an Address field to your taskbar. On XP at least, you can type in programs (same as the Run command - just type "cmd" and hit enter to get a command prompt, for example), URLs, or folders (typing "C:\program files" will open that folder - name completion included).

by drison

I have always been able to setup Explore views as follows:

Control Panel: Icons
Everything else: left pane directory structure, right pane files within path or directory.

I can get XP to give me one or the other of the above and cannot consistently get the left pane to appear without having to go thru the Folders button. Are we now so dumb we do not need to see the directory?

by kieseyhow

Are you using Internet Explorer instead of Windows Explorer to view your files?

The left-hand directory tree (folders) should display by default, unless you edit the registry or use some sort of tweaker program to alter that behavior.

If you use Internet Explorer (just as functional) to view your folders, the directory tree does NOT display by default, and you must click the "folders" toolbar button to turn it on.

Try right clicking folders as a workaround, and select 'Explore' from the context menu. Also you can modify the Windows Explorer shortcut and add the command line switches that D-MAN7257 graciously provided you to force Windows Explorer to display as you wish.

Once you get your perfect Windows Explorer setup, put the shortcut onto your 'Quick Launch' toolbar on the TaskBar for easy use.

by ehartshorn

I just read the 10/7 XP tip "Log Blue Screen of Death errors" about using *.wdl (Watchdog) files to tshoot bsod's. I have XP Pro SP1, I have had a few bsod's, but I have no *.wdl files on my system. Is there something that needs to be turned on to create these?

BTW, is this available in 2003? 2000?

by mrdleigh

It would appear, at least from my searching, that "Watchdog" is not a built-in XP thing, but a shareware ($35) product. Perhaps the nice folks at TechRepublic are offering us all a copy for free?

by Member 25073970

I just looked on 4 XP computers and cannot find any folders called logfiles. So something about this article seems incorrect or incomplete.

by rindi1

The Logfiles directory is of the type hidden, so you need to set you folder options to show hidden files or folders.

by jrevier

I am among oither it appears that the article called "Examining a BSoD error with the Watchdog Event Log" is not making the grade. Who ever wrote the article need to provide more deatil as to what they are talking about. I have looked a several machine and I can find a Logfiles directorty in a different place than is decribed it only contains FTP server login information.

1) How to you get the functionality to occur.
2) Could it be controlled by domain policy?
3) The directory path mentioned does nto show up as indicated.

I found the use for what the article was saying not show me how to get it to work as described.

JR

by harposdad

I agree with the previous users. Come on Techrepublic, get your act together, You cannot send your readers on a wild goose chase with such an obviouse lack of information.

Some of us in the real world rely on your information to be accurate and uptodate to carry out our trade.

I find this extremely poor reporting.

by nothanks1900

Watchdog log
Just finished reading your newest newsletter concerning the use of the Watchdog event log. Problem is, there's no Logfiles folder on any of my systems, nor are there any .wdl files. Is there something that I'm missing here? Does Watchdog need to be started first or does it autostart along with Windows?
Any help would be greatly appreciated.
Thanks

by Greg Shultz

As I understand it, the Watchdog Event Log is created by Windows XP's Error Reporting feature.

Do you have Windows XP's Error Reporting feature turned off? If so, Windows XP may not generate a Watchdog Event Log.(Search for "Error Reporting" in Windows XP's Help and Support Center.)

Many people turn the Error Reporting feature off for fear that Microsoft will collect personal information from an error report. You can learn more about this on the Microsoft Online Crash Analysis site at
http://oca.microsoft.com/EN/welcome.asp

Here is an example of a Watchdog Event Log related to a BSoD caused by a problem with an ATI video driver:

//
// Watchdog Event Log File
//

LogType: Watchdog
Created: 2004-03-13 21:31:18
TimeZone: 360 - Central Standard Time
WindowsVersion: XP
EventType: 0xEA - Thread Stuck in Device Driver

//
// The driver for the display device got stuck in an infinite loop. This
// usually indicates a problem with the device itself or with the device
// driver programming the hardware incorrectly. Please check with your
// display device vendor for any driver updates.
//

EaRecovery: 1
ShutdownCount: 79
Shutdown: 0
EventCount: 8
BreakCount: 8
BugcheckTriggered: 1
DebuggerNotPresent: 1
DriverName: ati2dvag
EventFlag: 1
DeviceClass: Display
DeviceDescription: ATI MOBILITY RADEON 9700
HardwareID: PCI\VEN_1002&DEV_4E50&SUBSYS_017C1028&REV_00
Manufacturer: ATI Technologies Inc.
DriverFixedFileInfo: FEEF04BD 00010000 0006000E 000A18FC 0006000E 000A18FC 0000003F 00000008 00040004 00000003 00000004 00000000 00000000
DriverCompanyName: ATI Technologies Inc.
DriverFileDescription: ATI Radeon WindowsNT Display Driver
DriverFileVersion: 6.14.10.6396
DriverInternalName: ati2dvag.dll
DriverLegalCopyright: Copyright (C) 1998-2002 ATI Technologies Inc.
DriverOriginalFilename: ati2dvag.dll
DriverProductName: ATI Radeon Family
DriverProductVersion: 5.2.3790.2

by mrdleigh

If you do a search of Google for Watchdog, you'll find that it's a shareware product. Here's their web site:

http://www.keroonsoftware.com/elwatchdog.html

I don't have (and won't pay for it) and DO have error logging on and have done the on-line crash anaysis innumerable times (unfortunately) and I've never had a Watchdog event log my box.

by nothanks1900

Just finished reading your newest newsletter concerning the use of the Watchdog event log. Problem is, there's no Logfiles folder on any of my systems, nor are there any .wdl files. Is there something that I'm missing here? Does Watchdog need to be started first or does it autostart along with Windows?
Any help would be greatly appreciated.
Thanks

by rrm_computer

When I boot XP there is a message that there is an invalid BOOT.INI file and it uses Windows to boot the system. There is no BOOT.INI in the root of the C drive. I've changed the View option to see all files included protected ones. I tried to setup a task which needs to examine the BOOT.INI and it tells me that it does not exist. This confirms that it is not present. Is this something that I can create using a utility or do I have to construct a file in the required format? I am using a hard disk that is partitioned C and E and only using XP on this notebook. Drive D is alloocated to the DVD/RW. TIA Lugia

by cdplayer

After you receive the message:
Invalid Boot.ini
does it say something like:
Windows could not start because the following file is missing or corrupt:

\some file name

by wzeig

What exactly do you mean by NTFS compression? I am not familiar with this.Thanks.

by bfilmfan

Windows NT/2000 supports compression on individual files, folders, and entire NTFS volumes. Files compressed on an NTFS volume can be read and written by any Windows-based application without first being decompressed by another program.

Decompression occurs automatically when the file is read. The file is compressed again when it is closed or saved. Compressed files and folders have an attribute of C when viewed in Windows Explorer.

Only NTFS can read the compressed form of the data. When an application such as Microsoft? Word or an operating system command such as copy requests access to the file, the compression filter driver decompresses the file before making it available. For example, if you copy a compressed file from another Windows NT/2000?based computer to a compressed folder on your hard disk, the file is decompressed when read, copied, and then recompressed when saved.

This compression algorithm is similar to that used by the Windows 98 application DriveSpace 3, with one important difference ? the limited functionality compresses the entire primary volume or logical volume. NTFS allows for the compression of an entire volume, of one or more folders within a volume, or even one or more files within a folder of an NTFS volume.

The compression algorithms in NTFS are designed to support cluster sizes of up to 4 KB. When the cluster size is greater than 4 KB on an NTFS volume, none of the NTFS compression functions are available.

Each NTFS data stream contains information that indicates whether any part of the stream is compressed. Individual compressed buffers are identified by "holes" following them in the information stored for that stream. If there is a hole, NTFS automatically decompresses the preceding buffer to fill the hole.

NTFS provides real-time access to a compressed file, decompressing the file when it is opened and compressing it when it is closed. When writing a compressed file, the system reserves disk space for the uncompressed size. The system gets back unused space as each individual compression buffer is compressed.

by hal 9000

That the product Key is not recognized by Windows. This happens a lot with the prebuilt computers where you get the makers Restore CD and not a MS CD to reinstall Windows from.

There are a few things you need to do first the first is to wipe the drive so that none of the existing data gets cross linked on the new install. With XP use the install option to format the HDD and finally if the product key is not being accepted by Windows you will have to contact the maker for a replacement Product Key.

If you have the MS OEM CD then you can ring MS and quote the numbers off the center of the CD and they will issue a replacement Product Key but if you only have the makers restore disk you are stuck with them for a replacement product key. What quite often happens is that an old version of XP is used to load the computer originally and the supplied restore CD is a latter version of XP so the Product Key on the COA doesn't work even though it may have been the right key shown when the unit was running. Once you get a replacement Key you can either leave that as is or change the key over to what is on the COA but keep a copy of the replacement key as you'll need it latter.

Col

by bfilmfan

A computer's SID is stored in the Registry's SECURITY hive under SECURITY\SAM\Domains\Account. This key has a value named F and a value named V. The V value is a binary value that has the computer SID embedded within it at the end of its data with the standard format of three 32-bit subauthorities preceded by three 32-bit authority fields.

It is possible to forge a SID as discussed by Microsoft in Security Bulletin MS02-001 http://support.microsoft.com/default.aspx?scid=kb;en-us;289243, but this would only apply is you already KNEW the SID. I think we can all agree that this is not the case here.

You can generate a new SID easily with this tool, which would solve most of the issues. It wouldn't solve issues of pushing the user back into their security groups or onto the ACL's correctly.
http://www.sysinternals.com/ntw2k/source/newsid.shtml

For that issue, you would need a tool capable of restoring the system state of the machine with nested group information. For that issue, I'd recommend for workstations ERDisk http://wm.quest.com/products/erdisk/ and for AD Aelita Recovery Manager http://wm.quest.com/products/recoverymanagerad/.

I've used all those products to deal with issues being experienced by clients.

by patswheels1

Just after I installed SP2 all of the programs that had the ability to read text aloud stooped working, and even after I reinstalled those programs they keep saying that "the driver I need has not been turned on" and I can not figure out what to do.

Can any one help me and if so send me an email and I will respond.

Thank you,
Patrick Brennan
Patswheels1@netscape.net

by hal 9000

In the Ask for Help section but supply a lot more detail as those who frequent that area will need to know what is not working and any error messages that you may be getting. You will also get an Auto Generated response every time someone answers your question.

But as a starting point uninstall SP2 reinstall all the patches and I think you'll find things work perfectly OK. SP2 is known to break at least 10% of all systems running XP and from a business point of view it just has not been rolled out across any of the systems that I administer.

Col

by gimorde

Create quick notes with WordPad
In today's Windows XP Tips it said to open WordPad, write a message and drag to desktop. I did this, but when i double clicked the icon, it asked me what I wanted to use to open------i clicked WordPad, but all I got was a page of gobblygook--circles, squares etc.----no message. Any ideas why?

by creckinger

One thing to check is the format(extension) that you used when saving the file in Wordpad. I would suggest saving them with a .doc (Word format) if you don't have Word installed, or .rtf if you have Word installed. Then check your file associations to be sure that Wordpad is the program to open those files.

by fivecentfather

My 'Open With...' dialog option in Explorer's right-click context menu has been broken for a long time.

Selecting it from the menu does nothing. No dialog, no error, just nothing happens.

I know this is probably caused by a registry corruption.

I'm running XP Pro with SP2, but I had this problem even before upgrading from Home to Pro and installing SP2.

Anyone know the registry keys/settings that control/enable this feature. I don't need to use it often, but when I do, it's very frustrating to not have it work.

Thanks,

Ken

by arwin

Does anybody know how to put two XP installations onto one disk with bootmagic.
We have tried to install on XP and copy the partition with pq magic. Afterwards none of the two XP's will start again.
We use bootmagic for reason as partition hiding and password protection to the different XP's.

Arwin van der Laan

by unclerob

I remember reading a post somewhere where a user was dual booting win2k & winxp, one drive, 2 partitions (used pqmagic to setup the partitions), win2k was installed first, winxp was installed second. Dual booting is working without problems at this point. He then booted up into win2k, while running win2k, installed winxp cd which autoran and he then selected upgrade OS option, doing this allowed him to run 2 different winxp installs on the same disk. Never tried it so I can't confirm that this works but it might. Just my 0.02 cents.

by tevoy

I have setup up dozens of machines in dual or triple boot configurations using Boot Magic as the manager.
My experience is with W2K/W2K and W98/W2K/WXP.

You need to determine the limits imposed by your bios. Old machines need boot code kick started below the 8 gig barrier. Newer bios don't suffer from this limitation.

The trick is to set up your partitions using PQ Partition Magic. Depending on which version of Boot Magic you are using; you may require a small Dos partition to hold the boot manager files. 50 megs is probably enough but I used 200 megs (my first Toshiba laptop came with this size drive). Later versions install into the W98 or W2K.

Here's the critical part. You must boot into Partition Magic and set the partition you are targeting for installation of the 1st copy of W2K to 'active'. Reboot and follow your normal installation. Once you are done and W2K (or XP) is up and running ok, boot up with Partition Magic and set the next partition 'active'; reboot and complete an install against this partition.

Finally, install Boot Magic to manage access between the 2 versions. Again there are 2 ways of doing this depending on what version of PQPM/BM you are using.

If the original harddrive had a OEM choise between W2K or XP on the initial boot; the older versions of PowerQuest PM or DI will not work. Blow away all the partitions then use the fdisk/mbr to start with a known state. The older utils should now work; if not I think it was DI7.x or so before it could work with XP natively.

Hope this helps.

by atcollege

The advice was overly complicated.
You can add a folder location to My Places Bar(Office apps) by...
1. Going to File, Open or Save As in any Office app.
2. Navigating to the desired folder. The folder should be in the large box, not the look in box.
3. Make sure the folder is highlighted
4. Click on the Tools drop-down
5. Click Add to My Places
6. Cancel out of the dialog box and it shows up in all of Microsoft's File Open or Save As dialog boxes.

by willropeforfood

I need a bit of help in finding the "this key" key in the registry. I want to hide my workstation from anyone else on my network. I have tried doing it through the CMD prompt but the command will not go. This is what I typed

C:\NET CONFIG WORKSTATION\HIDDEN:YES

And it brings back the message

incorrect syntax the blah blah blah is:

NET CONFIG
SERVER | WORKSTATION

I have XP Pro w/SP2. Any help will be very much appreciated. My email address is willropeforfood@yahoo.com for any feedback.

by volentib

Your syntax *is* incorrect. The /hidden switch is used with the server service, not workstation.

by paulr323

I'm not sure if you can even get the hidden attribute with the system running as a workstation. I believe you can only do it with server. Try and run a NET CONFIG SERVER, then do: NET CONFIG SERVER /HIDDEN:YES

by gekase

From what I can find, the hidden command only works for servers, not workstations.

by thewrightman

You are using the incorrect syntax. Try the following:

C:\>NET CONFIG SERVER /HIDDEN:YES

Edit: It appears you already had an answer, so my post was superfluous. Sorry.

by ron

If you want to unhide it later
net config server /hidden:no

You are configuring the server SERVICE as opposed to the workstation SERVICE, so it will work on workstations!

by scameron.itpro

If you so choose, the free version of Zone Alarm with the high settings will give you the results you want. just open the ports within zonealarm to do anything else you want.

Scott

by spiritcat

To hide a computer from Network Neighborhood on other machines on a network you can use the following registry key:
HKLM\System\CurrentControlSet\Services\Browser\Parameters\ add a Dword value called Hidden and set it to 1.
Additionally, I use ZoneAlarm to prevent access to my computer from others on the network. Just because your computer is "hidden" from the Network Neighborhood doesn't mean that someone can't manually type in the computer name and access it.

by palotta

You will need to modify the following Registry value:

[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\lanmanserver\parameters]
"hidden"=dword:00000001

The default is "0" for not hidden.

by fadbel

"Navigate between directories quickly" was interesting. Did you know you could expand on the use of the TAB key in the Command Window?
Here's some additional info I passed on to my DL.

1. To get to the drive you are searching through, enter the drive letter, i.e. E:

2. To get to the root of a drive to start your search, enter CD \

3. To Back Up one directory, enter CD ..

There are a number of other things you can accomplish at the ?DOS? prompt (I?m reverting).

Let?s say you want to edit an editable file, for instance, Config.sys.

At the C:\> prompt you would enter ?Edit C [TAB]? and continue hitting the [TAB] key until Config.sys comes up, then hit Enter. (Or you can put in the first couple of letters like, CON for the Config.sys file. The idea here is to save keystrokes.)

You can experiment with the functionality of using the TAB key but for guidance, remember that the initial command (CD or EDIT) is what the system is waiting to act on.

Frank Lebda

by imtiazgulkhan

sorry i didnt know who to setup my question , but ihave a prob with win xp , mostof hte time when i try to instal he xp , after the setup has copied its files to hard disk and rebooted i get msg like" physical memory dump " or " one of ur hardware is not installed properly , restart" i dont understand the prob.andit happned so many times ,plz tell me what to do abt it . plus recently twice it happend that after restarting to that prob i lose al of my partitons ,

what should i do if i forget my admistrator pasword and i dont wanna reinstall xp