Discussion Locked

Chime in about Windows XP

0 helpful
140 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

This is page 2 of the discussion. Read the opening post

140 replies

by hal

Hadn't checked back here in awhile and am I sorry. The sfc.exe tool is EXACTLY what I have been looking for. Thanks. See the danger as it could change some files so that installed programs would quit working properly, Firefox v1.0 did, but a simple uninstall and reinstall and all was working as it should again, with the errant file fixed that had been causing my problem.

Very much appreciate your help. Started to make this a private message and realized I am probably not the only one with this type problem.

Thanks again.

by olsenbanden2

For the Admin password problem there is a simple solution and that is to get the Winternal software and there is a "locksmith" function where you can set the Admin Password to what you want.
For the other problem try searching the KB's on Microsoft or check this link.
http://www.jsifaq.com/reghack.htm#Tip%20Index
type in your error message and you may find the answer there.

by sderf1

I have tried everything on XP to get defrag to schedule. It not on the list of options and I have tried to do it manually, like goto> accesories> tools> defrag . The next day I look and it says defrag run ----never.
It was easy in 98 why does Mircosoft have to be such a pain and change things we need.
Thanks
Derf

by greyseal96

Hi,

I set my folder options to show hidden files AND also hidden system files. When I went to c:\windows, there was no dir named Logfiles

by s.perris

Hello,

trying to find help on managing pertitions I accidentally came into this forum so I would like to describe my problems hoping to get an answer from some expert!

I have a PC with two hard disks (both Maxtor):
disk1 - size 20 GB
disk2 - size 160 GB

Initially I loaded Windows XP Pro (Greek) in Disk1 and made 4 partitions: one primary, [C] NTFS and an extended including 3 logical partitions for Linux

After connecting disk2 I installed there Windows XP Pro (English) in one primary partition NTFS [H]

After this I had dual boot each time I started, so I could start Windows either from C (disk1) or from H (disk2)

A week ago I decided to format partition C with Partition Magic 8.0. The operation ended with error and then I used Windows formatting tools which also ended up with errors. I then resized the C partition to the minimum allowed size (54 MB) and reboot. After this momment, it has been impossible to boot from hard disk2 (partition H) and at the same time my dual boot option disappeared.

Next, I removed disk1 making disk2 master by adjusting the jumpers: Nothing! The system could not boot giving the message: "Error loading operating system"

When I connected again hard disk1 the following situation appeared: I could only boot from old hard disk1 (primary active partition C). Windows can "see" hard disk2 and all my files without any problem. But I cannot boot from hard disk2.
Parttion Magic als sees HD2 and partition H. I also managed to set partition H in status active.

What I guess has happened is that I destroyed my initial MBR which was written on hard disk1 in partition C (within the first 2 GB). I tried to use PQboot but it doesnot work since it only "sees" the partitions of hard disk1 and not hard disk2. I finally tried to install Boot Magic but Windows Installer came with an error:
error 1607: Unable to install InstallShield Scripting Runtime

Does anyone have an idea? Or where can I find Boot Magic installer? (since mine is probably corrupted)

by ustek

"...After this momment, it has been impossible to boot from hard disk2 (partition H) and at the same time my dual boot option disappeared..."-OS loader vanished.
"Next, I removed disk1 making disk2 master by adjusting the jumpers: Nothing! The system could not boot giving the message: "Error loading operating system" -Boot.INI neded corrections.
"When I connected again hard disk1 the following situation appeared: I could only boot from old hard disk1 (primary active partition C). Windows can "see" hard disk2 and all my files without any problem. But I cannot boot from hard disk2." -OS loader is only for one OS. you need either reinstall 2nd instance of OS to repair the loader or use any Boot manager prg.

by s.perris

I will try to find a suitable boot manager program, and if not I will reinstall Windows

thanks

by aaron a baker

May I suggest;
If your going to re-cut your drives, why use a lesser program. Why not go right to Maxtor and get the Maxblaster.
That way, there would be no doubt as to the accuracy of the partition calculation or outcome.One this is done.
You can proceed to set up your Drives as you wish.
At least you would know that your drives are partitioned properly.
Maxtor also includes all settings and jumper configs in the program.
Just thought I'd pass this on, for what it's worth.
http://www.Maxtor.com-en_us
Good Luck.
Aaron

by hochspeyer

Does anything like this exist in Win 98? I have a heterogeneous Win environment at home (going back to Win 3.1), but often use a Win98 machine for database work and Internet access. As it is an old, slow machine with a single slow HDD, I'd like to minimize overhead. I do run Norton, Adaware and Spybot, but it's a machine that's accessible to teens, so I never know what "utility" they may have downloaded. Any suggestions?

by bobrichmond

Windows 98 has a System Configuration Utility of the same name and accessed the same way as Windows XP. Just click on "Start", click on "Run...", type in "msconfig", and then hit the enter key or click on "OK".

by hochspeyer

Thanks- I knew that, which just goes to show I was having a Windows moment (sounds better than a senior moment!)

by craig herberg

Win 98 does have Msconfig, which you can use to keep programs/services from starting.

Good luck with your computers and teens!

Craig Herberg

by house

I've decided to post the rest of the process

1) start up IsoBuster and mount your xp cd

2) select the bootable cd floppy icon, then on the right pane - right click and extract the *.img file to a local folder

3) start up nero and option to create bootable cd

4) select the boot tab, choose 'image file' and browse to appropriate *.img

5) set the 'loaded sectors' to 4, make sure the 'Nero bootloader' is set for message, and that you have 'no emulation' in the emulation field

6) Move to the label tab and enter the actual label of your XP cd for both ISO 9660 and joliet options

7) on the iso tab, make sure that file name length is set for level 2, format in mode 1, character set is standard iso9660

8) the relaxed restrictions must be all checked off... especially the "do not add the ;1 iso file version extension

9) line up the entire contents of the temporary XP folder that you created for burning... burn it

If my methods are in any way unclear, google the topic, and you will find a better reference I'm sure

by jeff

Thanks for finishing the procedure. This is definitely a useful tip.

Jeff

by house

The same method can be used for sp4 on 2k Pro and Server. The extraction argument is different though; I believe it is a "-s", but don't take my word for it.

by joesedor

Isn't easier to purchase Microsoft XP SP2 Disk free plus shipping. (less than $10.00) Joe

by craig herberg

It is much easier to get the SP2 CD if you just need to reinstall XP on one or two computers. For many reinstallations, it is worth the investment of time to create your own Windows XP SP2 slipstream CD.

Craig Herberg

by landon_007

On average, what % does NTFS Compression reduce drive, folder or file size ?

Thanks for your help!

by aa7800

Check task manager (Ctrl-Alt-Del) and see how many processes you are running. I just checked mine and it's 29. I'm running XP Pro SP1 (don't load SP2 for at least 6 months) and, yes, I'm also running both a firewall & anti-virus (only one of each).

At boot-up, 38 processes load then they unload themselves when they've done whatever (DNS resolution & other misc housekeeping stuff).

I can do a "Start-Turn Off Computer-Restart" cycle in a minute and 10 seconds. However, I can do a "sleep" and I'm fully shut down within 8 seconds. I've never timed the wake-up because it seems to depend on what I left running but it is less than a minute.

Do a reload of everything on a clean format. Do not let any of the stuff load itself. Try not to use Norton or Creative unless (like I do) you put them on a tight leash and muzzle.

I got these results by loading stuff one at a time (I know that's all you can do) but what I mean is I checked out msconfig after each program loaded and unchecked stuff from Start, disabled a few in Services and did a regedit on the stuff I was removing. I used some of the tips & tricks I've learned from here & CNet regarding working with the registry. I actually had to undo one of them (the time to load menu or something like that) because the damned thing was too fast--made me dizzy.

I've also had good results by running Spybot about once a week, and Registry First Aid (from Rose City) after each mod. When I finished the install of XP and all the add-ons EXCEPT SP2, I ran RegFirstAid. It found almost 2000 problem items and I let it delete almost 1000 (1K) items--it was 900 and change.

I keep Norton around only for virus control & speed disk--I've got a year left. I DON'T let Symantec do automatic updates or anything like that. I always want to see if "uninstall" can be done (for Microsoft patches) and, having been burnt, I don't believe all the things that the vendors say about how easy it is to uninstall their stuff.

Be careful about how you load and what you load--all the bells & whistles cost memory. Their are some of them I kept around (I like Themes). Others are required rarely so switch them to Manual. Don't change too many at one time because then, when something doesn't work, you can't figure out which one of those services you needed.

XP loaded "Wireless Zero Configuration" and (I think) "Uninterruptable Power Supply." My machine ain't running wireless (my PDA does an infrared connect and, though there aren't any wires, that ain't wireless). I don't have a back-up battery yet--I still use OK power strips--so that means disable the uninterruptable--it's irrelevant.

I've been picky on this last configuration but it should last a year. I figure a reinstall is in order once a year--it's a high colonic enema for your computer system.

Good luck.

by aa7800

The 7200 rpm w/ 8MB buffer--133 DMA. Lot's of RAM (2GB) and load only what you need or want (why let other stuff live rent-free in your system). Window's appetite for memory has been around from the beginning (1990?), but it can be tamed--even by a novice.

by fadbel

A few years ago, I obtained the program "Partition Magic", a great tool for creating/changing partitions "on-the-fly". Along with the PM was a utility program called "Magic Mover". This utility allowed you to select full programs with their support and data files and move them to anywhere, even another drive. The program would automatically make the necessary adjustments to the registry and, when completed, the moved programs worked like they were resident there from the start.
With the latest releases of Partition Magic, Magic Mover disappeared.
Does anyone have info pertaining to Magic Mover or another utility program that efficiently accomplishes the same function?

by professorcurt

This just started a few days ago. My PC goes into a re-start cycle almost at random. No warning, No error message, nothing. Suddenly just a black screen, then the manufactures logo, and Windows restarts just like when I install an update and have to restart my computer. I might be in a document, on a (secure) website, or like last nite I was running Norton AntiVirus Scan when it happened. Any suggestions or ideas?? This is really getting anoying...

by billinn(nospam)

Here is my boot.ini file. You just need to copy it to a text file and save in the root of C:\

[boot loader]
timeout=10
default=multi(0)disk(0)rdisk(0)partition(1)\WINDOWS
[operating systems]
multi(0)disk(0)rdisk(0)partition(1)\WINDOWS="Microsoft Windows XP Home Edition" /fastdetect /NoExecute=OptIn /sos

Works for me!

by tgallant44

I have an intruder that is opening ports 67,68 and 1900 on my windows XP, this has been going on for four years now, and able to close downloaded programs remove the trial date etc.
who can help me with this.

by bagmaster50

Go to control panel/folder options/view, scroll down to "Restore previous folder windows at logon", uncheck it. If it's already checked, uncheck, apply, recheck, apply.

by dasec

create a shortcut for explorer.exe. Right click the shortcut, select properties and in the 'Target' field, add a space and /e after explorer.exe then select apply. The result will be:

C:\Windows\explorer.exe /e

by pbrownlee

I have been on the phone for hours with the boys in Redmond on this. I have tried System Restore, XP repair installs & parallel drive intalls and repair and I can not get .Net Framework to install correctly it gets 2/3rds of the way into the install to produce fatal engine error 7x698o. My HD appears good has only 2 partitions both NTFS. WIN XP pro on C: drive was loaded normally. All this occurred after a failed AV install and the CS desk for M$ in India incorrectly advised a roll back from SP2 by the repair load of XP without unistall of SP2. Needless to say after the repair load of XP pro, I can not uninstall SP2 or get .NET Frame... to install. they advise reformat and fresh install after B.U. Is there any other choice?

by gary56789

Make sure the failed AV install is completely deleted (c:\ and c\Program Files plus any registry entries and common files).

Sometimes a failed update causes problems. Launch Services.msc?Automatic updates--Stop service. Rename Software Distribution in c:\Windows. Restart Automatic updates.

Then, try to reinstall SP2 (many rollbacks/uninstalls of SP2 usually cause more problems than they are worth).

It would be helpful if you could post the results of the above.

by aaron a baker

I had the same Problem. I couldn't install Netframe. No matter what I tried, it would get half way and then stop and jam everything up. It turned out that I had to go to Microsoft to get a program called " DOTNETFX.EXE " and install it first.
Once done I was able to install Netframe with no problem. It seems one won't work without the other. Another MS Omission.
Should you wish, I can send you this small program or you can get it at Microsoft.
Good Luck
Regards
Aaron

by pbrownlee

Thanks for the suggestion: Here's an update of that problem. It seems that the AV program really was to blame. It was installed under SP2 so when I rolled back to SP1 the M$ uninstall glitched on the AV residuals in the Registry and OS sys files.
To further complicate the problem when the .Net v2 failed to install I presumed that the AV was causing it. However, when SP2 is rolled back and the .Net v2 is alterred not dleted or uninstalled.
Also the AV I was using would not work at the SP2 level it was installed under, when the OS is rolled back to SP1.
I fixed by BU and wiping partition and starting from scratch. This was easier than the M$ suggestion of a parallel install and troubleshooting, since I was upgrading my MB.
When I buy an OS I don't expect to an unpaid Failure Analysis Engineer for M$. Oh by the
way this triggered the exceeded registations for the OEM OS. Necessitating a call to India and getting a string of unintelligible numbers and alphas requiring a second call screening for understandable English. Which I quess on the 2nd call back from your same number you get a very well spoken Indie.

by aaron a baker

Here is a copy of My Boot ini file.
This is from my Windows XP PRo
Hopes it helps you out.
Good Luck
Regards
Aaron

BOOT.INI

[boot loader]
timeout=10
default=multi(0)disk(0)rdisk(0)partition(1)\WINDOWS
[operating systems]
multi(0)disk(0)rdisk(0)partition(1)\WINDOWS="Microsoft Windows XP Professional" /fastdetect /NoExecute=OptIn

by bluron

until xp came out i was stuck with windows ME. the program succeeded in crashing my computer at least once a week including haveing to do format and reinstall every couple of months. since i've loaded xp, the only time i crashed was when i was trying a beta spyware program form symantic. theres probably a pretty good chance the crash was my own fault. intresting how one person can use an os like me and have no problems but switch to xp and end up bald from pulling their hair out, or vise versa using me. making sure you have enough ram is very important with xp, more so than with me or so i have found. good luck and keep on truckin lifes to short to sweat the small stuff.

by sgt1035

...what number you called? Since I made and used a slipdisk for reinstallation it will not recognize my registration and tells me it is 'illegal'.

I spent almost 2 hours on 'calls' trying to rectify this...I finally gave up.

by rdubrey

I would use PC anywhere or Goto my pc. I use them both and they are easy to Setup.

by mypl8s4u2

First off you need to know what account is logging in on the HOME computer. The actual account, not the name. you can find this by first double clicking on MY COMPUTER, then click on TOOLS, FOLDER OPTIONS, and click on show all files. Once done, navigate to DOCUMENTS AND SETTINGS, and look at the users who have logged in. If you do not see your user name, then look for OWNER as a default. If that?s the case, you need to give that account a password and you need to make sure OWNER is a user in the administrators group of the Professional machine. Make sure both machines use exactly the same password (case sensitive). Once done, you shouldn?t have any problems.

by another canadian

I found also that my problem of hickup, stalling and hesitation was eliminated with perfect disk 7.0 to be honest and I use a registery cleaner too (Registery First Aid Platinium).

I have the XP Home Edition running on a ASUS motherboard with a sempron 3000 and a ATI AIW AGP 9800Pro and One gig of Memory but I have to put the speed of the card at 4x instead of 8x because my motherboard only give 1.5v and I play BF2 on it and do video capture and have no problem what so ever.

For the Perfect Disk I have the software managing the Ini file and layer.

If you told me to go back to 98 I would laugh.

For network I dont have all the problem some did have because I use a Router/switch the same that I have 6 years ago with the 98 and me and it worked flawlessly since that time, it is a Linksys btw.

For me XP was a great improvement and I am building one as we speak for my mother it will base on another ASUS motherboard with the AM2 this time and the processor is a X2 4600 with 2 Gb dual channel and a NVidia for video card and two 320 Gb Segate HD 16mb cache sata2

System when finish to be build will cost $2300 including the 19inch flat monitor and ready for Vista Ultimate if needed.

I have check around and if wanted same spec she would have to shed 5k and above easy and that will not be even a retail ASUS mb.

I don't pretend that MS is the best but XP is a very decent OS in my opinion, especialy with new hardware, forget the onboard video and a good sound card and it 1 Gb of Ram and your system will rock.

This discussion is closed to new replies.