Question Locked

DVD Burner that came with my computer won't recognize blank DVD discs

0 helpful
22 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

Hello, I'm having an issue with my dvd/cd burner. It reads cds and printed dvds fine--but it doesn't detect blank dvds. I mean by this when I go to My Computer and double click the drive, it says to insert a disk into the drive. I've tried multiple blank disks, and none have worked as of yet. As a note, I've never burned using this drive before. It's a LG GSA-H20L that came with this HP (Windows Vista). So far I've tried uninstalling the drive and rebooting--which didn't work--and tried using different burning software to see if that would make a difference. I'm stumped on what to do, thanks for any help.

I downloaded the firmware for it to see if that would help, but I have no clue on how to flash the drive using a .bin file on windows vista...

Help??

22 replies

by dadspad

Also are you trying to use a DVD writable? These need formating.

Not haveing experience with Vista, wonder if you need a new driver.

Good luck.

by kris

I've tried Ashampoo Burning Studio 7 among many others.

After reading some of the comments I'm assuming I need to format the disc, however I have no clue how.

Can someone point me in the right direction as maybe that is the main issue here?

by thumbsup2

No, you don't need to format the disk. What you need to do is tell us what kind of stuff you want to put ON the disk so we can tell you what software to use to do it.

Do you want to copy another DVD? Do you want to create your own movie? Do you want to make a data backup?

Your burning studio program will create movies and maybe even copy DVD's. But, if you want to put some data on the DVD, like backup some of your files, then there should be some other program on your computer which will allow you to do that. You might have NERO or some other software designed for that purpose and not even realize it.

So, what is it that you want to do WITH the DVD?

by thumbsup2

You can't just double click a blank DVD. It's not formatted. It works the same way as if you tried to double click a floppy disk that was unformatted. The system says to insert a disk that it can read. Unformatted disks are unreadable.

Now that you've messed with the drivers and installation of the device, you may have problems getting it to run correctly at all. Hopefully, you've gotten it back to where it belongs, driver wise.

What is it that you're trying to do? Did you want to write some files onto DVD?

by oh smeg

Are you sure that it's actually a DVD Burner?

The description of DVD/CD Burner sounds very much like a Combo Drive that reads DVD's and burns CD's. These drives where used quite a lot by the Computer makers like Dell & HP.

If that is the case you can not burn DVD's in this drive only read them.

If it is a DVD Burner you will need to tell or list the burning software you are using however if all you are attempting to do is copy files to the DVD Blank you need to Format the DVD First so that it is readable by the OS. A blank Disc is unreadable by anything and as such you are getting exactly the right message. Everything here depends on what you are attempting to do.

As for flashing the Firmware in the drive the File that you have is the Data File that is the Firmware replacement [maybe] as I can not get any data from LG at the moment but you also need the Flashing Utility to run the application to enable the Data File to be written to the Hardware.

But as this came with Vista installed the drive must be fairly new so Flashing the Firmware is likely to have far more problems that you may cure.

Col

by thumbsup2

Like you, when I searched LG, I couldn't find it. But, I found this searching the net. Obviously, it must be an older model if LG no longer lists it. So, the media they're buying could be part of the problem.

http://www.geeks.com/details.asp?invtid=BLK-GSA-H20L-DO-R&cat=DVD

This LG GSA-H20L DVD?RW drive writes to double-layer DVD+R at up to 8x, double-layer DVD-R at up to 4x and single-layer DVD?R at up to 16x. With its 2 MB buffer, 140 ms average access time for single-layer DVD-ROM, 175 ms average access time for double-layer DVD-ROM and 120 ms average access time (CD) you can create errorless copies in minutes!

by oh smeg

Kind of reminds me of the old Kodak CD SCSI Burners that where useless once the Kodak media was no longer available doesn't it?

Still as the only problem of not being able to read a Blank DVD I wouldn't suggest Flashing the Firmware as that is unlikely to cure the existing problem.

Sounds much more like a User Problem than a hardware problem though doesn't it?

Col

by thumbsup2

Yeah, I've bumped into a lot of media problems through the years. My favorite recently though, is when the writers graduated from 4x to 8x. You never knew what the drive was capable of unless you looked closely and many weren't visibly labeled. If you put 8x media in a 4x drive, it froze ESPECIALLY on Win2K. Or, was it the other way around? Heck, I can never remember! :( But, there was a gap there where media wasn't compatible between the 4x and 8x drives. Once the drives got faster and faster and the 4x drives/media disappeared off the market, it wasn't too bad.

[i]Sounds much more like a User Problem than a hardware problem though doesn't it?[/i]

Ummm...... YEP! That was my first guess. Ya can't just double click a blank disk, no matter what kind it is. It doesn't work! ;)

by older mycroft

What's that phrase in computer-speak - [b]PEBCAK[/b]

Yep!

I thinks that's the case in this instance...

Oh, apologies SMEG, my LG is a Lightscribe, but I really bought it for its speed. I've NEVER even burned a scribing capable disc.

by kris

Stop trying to act like a smartass. I know that explorer won't detect blank discs. That is obvious, that is why I'm using burning software... which cannot detect anything either!

I've tried so many things, several software, several different types of discs, etc. nothing works. Now if it really does come down to me, please tell me, what am I doing wrong since you clearly know it all?

by kris

I want to burn a Video DVD. There is this exact option in Ashampoo Burning Studio. But like I said, it isn't working. I've tried other software as well, just haven't used NERO.

by older mycroft

Given the problems that you have had so far, what is the source of this 'Video DVD' ?

What are you wanting to copy ?

by kris

I have a movie in .avi format that I want to burn on my DVD. I know that I selected all the right options, however, when the program goes to burn the movie it cannot detect the blank disc either.

by thumbsup2

Your Burning Studio software would be something to use if you wanted to create your own DVD from, for example, pictures/videos you have created yourself. If it isn't working, contact their Tech Support.

To make a COPY of a DVD, you use the copy feature if that software has one. If it doesn't, you'll need something else to use. NERO is but one of many that can do it.

Warning: Some DVD's won't copy. It's called copy protection. And, attempting to circumvent the built-in copy protection is called Piracy, punishable by a hefty fine and/or jail time.

by thumbsup2

.... that your original post said, and I quote:

"It reads cds and printed dvds fine--but it doesn't detect blank dvds. [b]I mean by this when I go to My Computer and double click the drive, it says to insert a disk into the drive.[/b] I've tried multiple blank disks, and none have worked as of yet. [b]As a note, I've never burned using this drive before.[/b]"

Using My Computer [b]IS[/b] using Explorer. So, don't go defending yourself with a different story now. Yes, we know it's something you're doing. But, we can't get you to answer our questions. So, it's tough to help you when you're not here. We've asked you on a number of occations WHAT TYPE OF MEDIA did you purchase and put into the drive? THIS makes a huge difference.

Chances are that you've messed up the drive with everything that you've tried, different software, resetting to last good configuration, drivers, different media, etc... So, now, it's time to go back to square one and start over.

by thumbsup2

...... and start over.

(1) You have an HP computer running Windows Vista.

(2) You have an LG GSA-H20L DVD/RW installed.

(3) You have Ashampoo Burning Studio 7 either installed by you or came with the computer.

First question we should have asked is... Have you called HP for technical support for the drive that came along with the computer? It's probably still on warantee. If the drive is defective, they should replace it.

Second question, in Vista device manager (wherever that's at), is the drive listed as a DVD/RW or a CD ROM? After you "uninstalled the drive", did you reinstall Vista compatible drivers for it? We couldn't find that drive at LG, so perhaps they don't offer Vista drivers and, now that you've uninstalled what HP put on the system, it may be pretty tough to get it back.

Third question, when you start the Studio software and put a blank DVD in the drive, does the studio software give you a clue what it thinks the drive is? Does it list it as a CD ROM, a DVD ROM, DVD/RW? If the drivers are not correct for this device, ESPECIALLY in Vista, the software will not be able to tell what the drive really is.

Fourth question, what brand of DVD media have you purchased? Speed? Compatability? Specs?

by tig2

Your drive may READ a variety of formats but may not WRITE to all of them. Are you using compatible media for the drive?

by kris

Here is a screenshot from yet another burning software I tried:
http://bizkitproductions.com/screenshot.jpg

There is a disc inside but it still says "No Disc"... again it always says this no matter what options I select, and what program I use.

I've tried a FujiFilm DVD-R disc (compatible with 1x to 16x drivers & recorders) and I've tried a fujifilm DVD+RW disc (up to 4x)... both are 120 min and 4.7 GB

I've also tried a DVD double layer disc.

None of the discs worked, on all of the software I used.

I guess I'll just need to buy a new DVD drive.

http://bizkitproductions.com/screenshot.jpg

by oh smeg

Are you sure that it supports your DVD Burner?

If it doesn't you will get a constant Disc Not Found Message.

Col

by w2ktechman

Ok, the disk write head is out of alignment, you need a firecracker and a match to re-align it.

Place the firecracker in the drive tray (use paper to hold it in place if need be). Then light the match and close the drive bay. stand back about 30cm. watch closely...

:^0 :^0 :^0 -- LOL

Ok, Ok, seriously now
delete the drive in device manager. Reboot
if it detects the drive, then it should auto load the drivers for it as well.
Some systems ship with SW that has the advanced functions for the drive built in. For my DVD burner on a 1 yr. old HP system, I the DVD burning drivers were actually in the Sonic program, it would not work with any other program until after I ran Sonic..

Anyway, the burning program that came with your unit, run that. Use that program to try to burn a dvd.

If it does not work, see the beginning of this post again.

This discussion is closed to new replies.