Question Locked

Experiencing Bottleneck with RTX 4060 + i5-12400F - Need Advice

0 helpful
5 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

Hey everyone!

I recently upgraded to an RTX 4060 but I'm noticing my CPU
(i5-10400F) is hitting 100% while my GPU stays at 60-70% in
games like Cyberpunk and RDR2.

Current Specs:
- CPU: Intel i5-10400F
- GPU: RTX 4060
- RAM: 16GB DDR4 3200MHz
- Resolution: 1440p

Questions:
1. Is this a bottleneck issue?
2. Should I upgrade my CPU now or wait?
3. Which CPU would pair well without overspending?

Any advice appreciated!

5 replies

by kees_b

- i5-12400F (as mentioned in your subject line) or i5-10400F (as mentioned in your post)?
- What is the fastest CPU supported by your motherboard?
- With a CPU that's twice as fast your GPU will be the bottleneck. That's not what you want either, is it?

I think you'll never reach a situation where both are 100% in all games, not even in one game. Have a look at benchmarks to see the differences between different loads.

My answer to question 2: That depends on (a) your financial situation and (b) how unhappy you are with the current performance. If the performance is good enough for you, and money is a bottleneck then I wouldn't look at the percentages, but enjoy the gaming.

by rproffitt

The combination can be used to play games and it's ENTIRELY NORMAL for CPU and/or GPU use to hit 100% and the other not to be same.

The i5 and 4060 is what most will call entry level gaming. You'll have to reduce settings in most games to get higher framerates.

But is this bottlenecking? No. It's just doing the best it can.

by samanthacoleman035 edited

Yes, this is very likely a CPU bottleneck. The i5-10400F can hit 100% usage in CPU-intensive games like Cyberpunk and RDR2, which prevents your RTX 4060 from reaching full utilization. Upgrading to a newer mid-range CPU like the i5-12400F or Ryzen 5 5600/7600 would balance the system much better without overspending. Also try lowering background processes and tweaking in-game CPU-heavy settings for smoother performance.

by samc49002

It does sound like a bit of a CPU bottleneck, especially if the CPU is constantly hitting 100% while the GPU isn’t fully utilized. The i5-10400F is still decent, but newer games can push it pretty hard. You might be fine for now, but upgrading to something like a 12th or 13th gen i5 later could balance the RTX 4060 better.

by khizra javed

An i5-12400F paired with an RTX 4060 is generally a well-balanced combo, so a “bottleneck” isn’t usually a major issue in most modern games. In CPU-heavy titles or at very high FPS (especially 1080p low settings), you might see the CPU reaching its limit before the GPU is fully utilized, which is normal behavior rather than a serious problem. At 1440p or higher settings, the GPU becomes the main factor and the bottleneck usually disappears or becomes much less noticeable. You can also check background processes, enable XMP for RAM, and make sure your RAM is running in dual-channel, as these can impact performance. Overall, your setup is fine, and unless you’re targeting very high competitive FPS, there’s no need to worry or upgrade immediately

This discussion is closed to new replies.