how to break windows administrator password?
This is page 2 of the discussion. Read the opening post
Software
This is page 2 of the discussion. Read the opening post
by madhu_lwrd
by w2ktechman
This is a crack into a computer and its files and folders. However it is not meant to get into protected files (such as encrypted, or alternate installed SW (3rd party)).
This is only intended as a guide. Please check out the laws in your area before attempting to crack into someone else?s system. I cannot stress this enough. Continue at your own risk!!! Don?t forget, it is not too late to back out and reconsider (best option)!
Ok, Cracking a Win 2K/XP administrator PW and name (and enabling the account if disabled). This will give you full access to the system with unlimited permissions. If you are told that you do not have permissions, you can GRANT YOURSELF permissions, as this is a SUPER USER account.
First, you will need some HW and basic tech skills.
1. Antistatic wrist strap
2. Iron or Steel rod 3/4 to 1 foot long and 1/2 to 3/4 Inches round.
3. Electrically conductive gel
4. A new spare HDD (within the last 3 years)
5. A keyboard manufactured after 1997
6. A grounding wire -- up to 5 feet
7. A set of screwdrivers (small) with Philips, flat head, and Torx tips (or 3 small screwdriver sets)
8. Small hammer (not required but useful)
Ok, before you begin, put on the antistatic wrist strap. I cannot stress this enough. Follow its instructions to 'ground' yourself. But later this will not be enough, you will use the grounding wire for the more intense part.
Get your screwdrivers out, along with the spare HDD.
Open up the HDD. Note there will be screws under the labels. You can press down across the label to find the screw holes.
You need to pull out PLATTER 1 (top) from the HDD, and the magnets need to be removed from this drive.
Keep these handy.
Start the computer, but do not attempt to log on. Press Ctrl -- Alt -- Del. Type in any random set of letters and/or numbers (not special characters though). You MUST do 13 characters though, this is the key. There is a 'special' 'hidden' 14th character that you will need to access.
Use a small flat head screwdriver in between the P and O keys (funny story, they added it here for Override Password -- see the humor?). They added a special chip under/between these keys on all keyboards manufactured after 1997. This is a little known fact and very hard to obtain info (I can get into big trouble for posting it if they find out who I am). If you are unsure about your keyboard age, look underneath it. It should have a manufactured date on a sticker. If you cannot tell, go get another keyboard.
Back on point, use the screwdriver to 'pop' the chip. If you did not hear a pop, try again. It is a small chip that is directly under and between the O and P keys. I prefer using a small hammer with not too much force here, but not using one should work fine.
If you had 13 numbers and letters, you should see a 14th one flash quickly, but it is so quick that I rarely see it myself. The boot sequence may hang here. This is what should happen. Ok, power off the system.
Open the case and unplug the HDD (boot drive if multiples exist). Then remove the drive, taking precaution against damage.
Now with the boot HDD in one hand, grab the 1st platter from the spare drive. Place the platter underneath the boot drive (by the board and chipset). On the top, use BOTH magnets in a clockwise motion on the top of the boot drive. You must make at least 4 complete passes, but 6 is better. Since Windows was told to 'unlock' the password (via boot characters above), it is free to replicate on all platters and 'jump tracks'. That is why we need the platter underneath. And being the first platter means that it is the best possible platter to install it on.
Now put the second HDD back together being careful not to damage it. This should be put back into your machine to keep the PW until later, but it is not needed right now.
Ok, now is the tough part. We need to unlock the ADMIN account and reset it to administrator (if it was changed and disabled). To do this, on the boot drive look for where the platters all meet. There should be a screw or nut holding them all together. You need to 'ding or dent' very LIGHTLY on the top of the HDD case, away from the magnets and HDD heads. Some people like to put it at 180 degree from the arm for the heads. I should be visually dented, but not interfere with the HDD operation.
Now the HDD and Windows need to both be synchronized with this new PW mess that we created. The PW is probably floating around randomly on several platters. So install the boot drive back into the computer. Now get the small flat head screwdriver ready.
Boot the computer (it may make a bit more noise than usual, but do not worry.
OK, for a few seconds this should display on the screen "BIOS Revision". Look closely at the "S" in BIOS. Looks a bit off or not normal doesn?t it (requires really close investigation, sometimes it has been reported that someone has to look through several boots to notice it). Ok, this S is a keyword for "Synchronize" after the PW unlocking. This gets triggered in the BIOS whenever the O and P keys were tampered with.
Anyway, use the flathead screwdriver on the S on the monitor. To get it right, you may need to try several times. I suggest a couple of reboots to get setup properly.
If this is an older monitor (CRT) you may want a small hammer to aid.
Without too much force, you want to 'punch' the "S" in BIOS out. Quickly turn off the computer. Note: this is an update and highly restricted information. On all ?tft?, and ?lcd? monitors, the crack that is created from punching the ?S? out is automatically fixed on the next monitor boot. On the next monitor boot the flat panel ?sensors? indicate this activation and a gel will spill across the top corner. All you need to do is wipe it dry with a micro-fiber towel and it will be fixed. Newer monitors are better at this, and hold enough gel to do this operation 3 times before a refill.
Now for the final preparation before you obtain full access to the system. You will need a good ground so get out the grounding wire. Tie it to the computer case if another good ground is not close by. The best ground would be the 3rd (or grounding plug) in the wall socket. Bare about 1/3 feet of the other end and tie it around your ankle. Use the electrically conductive gel all around your hands and ankle (where the grounding wire is attached).
This step may take several tries, but it will be well worth it when done properly.
Turn the system on and very quickly plunge the metal rod into the power supply of the computer. A small hammer to help may be needed. BUT be careful as not to plunge it too far, we are looking to get a 'spike' not destroy the computer.
WARNING: Do NOT wear gloves!!! We need the extra grounding to do this properly, or else it may destroy the computer and put you at risk!
If you did not feel a slight jolt (very slight), try again with a little more force.
Ok, when done properly, clean up. Now restart the computer. At logon enter the username ADMINISTRATOR and for the PW type "P_W_R_E_C_O_V_E_R" and press enter. Yes, those are underscores.
You now have full access to the system
Didn't you read the answers we gave to that other cyberjerk? If we wouldn't give him an answer, what made you think we'd give one to you?
DOESN'T ANYBODY SCREEN THESE CALLS?
by boxfiddler Hot topic
by seanferd
by boxfiddler Hot topic
that whole accent thing will fall apart without the gutturals.
tideypot
by w2ktechman
by seanferd
by seanferd
by mdcruz
by seanferd
by t.balentine
It looks as if most of the sarcasm has died down some...so I'll make a teensy little post. *ahem* My first, btw.
I've been coming to you wonderful people for several years now. Mainly because I'm a Mac user with the wonderful opportunity to have to use Window based PCs at my job occasionally. No...I'm not technical with computers. I'm what's known as a media specialist (fancy word for a librarian in our schools today) and occasionally my common sense fails me. Thus I do what I've been trained to do and I research my troubles and try to learn. It's why I joined this PC community years ago. Every question I've had I've had answered here. Thanks to all of you and others who've asked who've had the problems that I've needed to resolve...negating any need for me to ask them. Unfortunately I've also not thanked you properly. Thereby my posting count is nil until now. I figured I would only be cluttering the boards with superfluous gack. Yes, it's quite possible I'll vanish again until I have another PC or Windows based problem I need to tackle. My personal mac isn't quite so complicated. It just seems to go on it's own...usually...without much tweaking.
I mention all this because I DO understand ethics and copyright issues and I sorta understand what you're driving at with 99% of all the responses I've read through this entire thread. Yup, the OP probably wasn't legit but some of us are.
I made what I thought was a rather neat swap with a colleague not long ago. I traded an old Tascam digital portastudio and an old Taylor guitar for his old IBM ThinkPad. She (the laptop) has been sitting for several weeks in my desk before I brought her home and tried to play. Lo and behold there's a password needed to log into Windows. My friend neglected to tell me he's locked the world out and it'll probably be awhile before I hear from him once he's settled after his move. No phone or email yet...if ever. We're not really that tight.
So here I am thinking "how hard can this be?". So back to ya'll for some answers and now I've got not only a locked up computer but heartburn after reading all the comments.
No, please...I DO understand what you mean by against the law doing what essentially would appear to be breaking into someone's home. So I won't insult anyone by asking how. I also won't admit that he left his Windows XP disc with me...because I think that's suppose to be licensed to the original buyer (Microsoft really gets you coming and going, huh?), but I do have one quick question before I hire professional help which I really can't afford at this time but might need. Since I'm not the original owner of the ThinkPad...I'm not certain what IBM needs from me to prove ownership other than the disc Microsoft thinks I shouldn't have...which I also don't have any receipts for.
If this is simply a Windows XP log-in issue...would reinstalling Windows get rid of this infuriating password? I read somewhere about Fdisking the harddrive and reinstalling. If this is just silly...I'll proceed to the next step. Saving my money for a bonafide tech. My adventure to the darkside appears to be a dumb one so far. *sigh* At least my friend only needs new strings to get my Taylor going.
by w2ktechman
you understand our point, and that we cannot verify if it is legit.
You understand copyrights and other legalities
You acknowledge that this poster was likely not 'on the level'
you know that even if an answer is posted here, others -- even those that may have misdeeds goin on, will have access to this info if we post it.
Also, you dig up an old post with plenty of these abound, and want us to answer anyway?
Please tell me it aint so!
Oh, btw -- have you tried calling IBM to see what they need?
and also, btw -- it is best to re-install, as you never know what virus/spyware or other cr@p is on the system. In fact, you should re-install about every year anyway.
by tig2
He asked if a re-install would solve the problem and then allowed that he would likely take it to someone who knows Windows systems better. A good approach if you ask me.
Right there with you on the re-install. A Mac user wouldn't generally think of that. Windows users do it religiously. Since my Mac turned one in November, I have thought about toasting the system and refreshing it but it doesn't seem to need it. I love my Mac! :D
by tig2
Your possession of the install media is not a violation of the EULA as far as I know and it DOES give you a few points. Give MS a call. They can validate the software by asking you for a series of numbers that are stamped into the inner ring of the CD. They will also (or at least used to) walk you through the process to get you back up and running.
You can also try booting from your install media but you will need to have your product key handy as it is a part of the install process. As the computer is second hand, that may be your very best alternative. That way you are starting with a scratch machine.
You might want to take a look at PCLinuxOS as it is very XP like in look and feel and negates any possible issue with ownership even though I seriously doubt that one exists.
Your tone in general indicates to me that you simply want guidance for something that is not known to you. You were candid about your issue and allowed that you were willing to accept what was known to you- password hacking is not a nice thing to do. You also didn't request a hack, you requested additional information about the problem you are having.
I don't validate or invalidate people by post count. I respond to them based on what they say. I hope that you continue to be an active part of the community and not worry that you aren't posting the right things.
I too love my Mac- bought it last year when Vista became inevitable. You are absolutely correct about the difference in user experience- the Mac is almost painfully easy.
Google is your friend.
by thumbsup2
The Windows installation media (the CD) goes with the hardware it is installed on. Since you have that in hand, all you need is the COA sticker (the license with the install key on it) which may well be attached to the bottom of the laptop. With CD in hand and a license key, all you need to do is start the laptop and quickly put the CD in the drive so it can boot up to it. If you're too slow, leave the CD in and reboot the machine. If it's the manufacturer's CD, it should reset the laptop OS back to the way it shipped from the factory. Then, you've cleaned all traces of the previous owner out of it and it'll be almost like new.
If you need more help than that, please start a new thread. This one is a bit long to find your posts in it.
HTH
"I also won't admit that he left his Windows XP disc with me...because I think that's suppose to be licensed to the original buyer..."
Nope. It's licensed to the hardware it was installed on. Look for a Microsoft sticker on the system. Write down the 25-character product key. Put the Windows CD in, reboot the system so it starts from the CD, and the Windows installation process will start.
By the way, have you tried entering a username of 'Administrator' (without the quotes) and leaving the password field empty? The default p/w is a null field, and it's possible your friend never changed it.
by w2ktechman
I was reading between the lines. Why would this person post this to an old password crack thread?
The suggestion is there with the 'ive got a problem' part, and the 'I am your friend, see, I understand'
The only thing missing was the exact phrase.
As for the actual question -- I thought I had answered it.
This discussion is closed to new replies.
Sort by Trending