5 replies
by thoopy39 Accepted solution
by mjd420nova Accepted solution
by thoopy39 Accepted solution
by chieumonguoitai Accepted solution
by thechas Accepted solution
It was very common for keyboard and PS/2 ports to be damaged if the keyboard or mouse was connected or disconnected with power applied.
Another thing to check is if the +5 volt power for the keyboard is present. Might just be an open soldered in fuse on the motherboard.
As to USB keyboard support, if the BIOS does not have an option for USB legacy mode, some older versions of Windows will not support a USB keyboard. Others will not support a USB keyboard until the USB driver is installed. Best option might be to find an old PS/2 ISA or PCI card.
As to cable select, is your IDE cable a cable select type cable? If not, the cable select option does not work. With cable select, the wiring of the cable takes the place of the drive jumpers for setting Master and Slave.
Chas
This discussion is closed to new replies.
Trending Storage posts
Sort by Trending