Question Locked

Please somebody help I think its the motherboard ANYONE PLZ HELP!!!!!!!!

0 helpful
6 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

Ok heres the situation one day i'm on my computer and I crash while playing a video game. Ok no problem. I restart and can't get into windows so i'm like ok no problem just restart again, however, this time when I restarted nothing happened. Nothing came up on the monitor or anything like that so I figured it was a HD problem. My brother said it was the HD after he tested it.. and got it to work in a upright position. Ok so I buy a new SATA harddrive motherboard is SATA compatible and nothing happens. I'm left to presume its the motherboard or power supply but i'm not sure. When I start the computer up It seems power is getting to the CPU, video card, CD-ROM, fans spin in the computer and on power supply, however, theres no indication that power is getting to the motherboard. The speakers are connected and working but there are no beeps.

I have a K8N Pro Sli motherboard. I believe it still may be under warranty. Any suggestions? Please anyone help I would much appreciate it and I will do anythinig I can to inform you as much as possible on anything else you may need to know. Thank you everybody....

6 replies

by maz

That sure looks like a bad motherboard to me, but it could also be a bad card.

Try removing all your cards and power up again, listening for the BIOS beep.

A bad PCI card can sometimes lock the machine up.

by dlrmonokee

can a missing pin or something lock it from starting? theres this big heatsink type goldish thing on the motherboard under it theres a chip that says Nforce 4 Sli anyway it has two big white pins that enclose it one is missing. Is this the problem? I believe this pin has been off for while though. And if the mobo had been functioning without it for this long it would make no sense. Any way to make sure 100% its the mobo? don't want to waste money=[

by hal 9000

If the pin holds the Heat Sink to the M'Board is missing the heat sink isn't making proper contact with the IC that it's supposed to keep cool so eventually it has overheated and burnt out. If you've been able to read the IC Identification you've had the Heat Sink Off and wiped away the Heat Sink Transfer Paste, if you've used your finger here you have contaminated the Heat Sink Paste so it slowly will stop working as the contamination spreads and other particles of gunk build up between the IC and the Heat Sink that is connected to it.

If this pin has been missing since new it should never have been put into service and if it broke while in service the moment that you noticed it missing you should have returned the M'Board for replacement. Though I seriously doubt that it would be accepted for a Warranty Replacement unless there is a bad batch of these pins and they are known to break.

Col

by k3ry

Ok guys..
first, this things always happend for PC CHIP Mobo. I said IT ALWAYS..
everything work fine, but no beeps..why?

have u tried to clean up the CPU?
open mobo CPU Fan, clean up them from the dust and replace again the processor.

i tried this for several times, and the mobo work properly n it turn to gv a beeps like normal.
But sometimes it wont, so i clear the CMOS battery, switch on for 5 sec without cmos battery, repalce it again. and it works for me.
But sometimes, it still gv the same problems ' no beeps '..ermm
i was figure out, why this happened? Btw, this not goes for long time. It will happened again 2,3 month later. Does it because of dust in the mobo? Maybe yes..maybe not..
Or it come from hardware problem or changed of hardware beside the mobo? Maybe..

eem..let me try to find out n works again for this kind of probs =.=

by k3ry

Ok guys..
first, this things always happend for PC CHIP Mobo. I said IT ALWAYS..
everything work fine, but no beeps..why?

have u tried to clean up the CPU?
open mobo CPU Fan, clean up them from the dust and replace again the processor.

i tried this for several times, and the mobo work properly n it turn to gv a beeps like normal.
But sometimes it wont, so i clear the CMOS battery, switch on for 5 sec without cmos battery, repalce it again. and it works for me.
But sometimes, it still gv the same problems ' no beeps '..ermm
i was figure out, why this happened? Btw, this not goes for long time. It will happened again 2,3 month later. Does it because of dust in the mobo? Maybe yes..maybe not..
Or it come from hardware problem or changed of hardware beside the mobo? Maybe..

eem..let me try to find out n works again for this kind of probs =.=

This discussion is closed to new replies.