Discussion Locked

SCSI nightmare

0 helpful
7 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

I have a workgroup server 8550/200. Attached there are a SCSI CD-RW Drive and a Tape Drive. We recently had problems with the tape drive and got a replacement. Since then I have not been able to hook either device up to the server. If i do the server will start but the mouse is frozen. Once I managed to get the tape drive attached but when i later tried both it froze again. Any thoughts.
PS yes its termintated and yes i shut it down first

7 replies

by peter.brown

Check the version of scsi manager in the system is compatible with the new drive that u installed in the machine

by bob hayes

Are the SCSI IDs set correctly? This is
really basic but I've caught myself making
this mistake, so it's worth thinking about.

When you replaced the tape drive, was the new
one the identical model as the old? Did you
use the old cable or a new one? Cable quality
is always a possibility. Does the Mac start
up every time with just the tape drive? If
so, the problem is probably with the CD-R or
the cables leadin

by ithink2020

If it is Ultra 2 SCSI and the drives are external there is your problem. Ultra 2 SCSI has a cable lenght issue. Most of the time the cable in the box is at max length.

This discussion is closed to new replies.