I have a DELL Precision 960 with an integrated Broadcom nic and an added Intel Pro 1000 GT nic.
Broadcom – Want to use for internet connection from a hub. TCP/IP properties are set for auto IP and DNS assign.
Intel nic – has 4 virtual nics for 4 different VLAN’s each with their own IP, subnet and gateways. These VLAN’s come through a single port on a Cisco switch. Each VLAN has it’s IP, subnet and gateway defined in the TCP/IP properties.
VLAN 90 – 192.168.42.108, 255.255.255.128, 192.168.42.1
VLAN 91 – 192.168.42.140, 255.255.255.192, 192.168.42.129
VLAN 92 – 192.168.42.208, 255.255.255.192, 192.168.42.193
VLAN 93 – 192.168.67.10, 255.255.255.192, 192.168.67.1
If the Intel nic is disabled in the network connections window the internet works fine. With the Intel enabled, no internet.
The internet connection typically comes up with an IP of 10.0.013.
The VLAN side is a closed network with no internet access. I want to have the internet access through the broadcom for remote access (VPN) and updates when needed.
Any ideas to make these two play nice?
Thanks,
Mike