Question Locked

2003 R2 Sp1 Random Freeze and Resume

0 helpful
4 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

Seem to be having a recent issue on my Dell 2950 4gb Ram and 6HDD 36x2 Raid1 300x4 Raid 5.

Working with Dell all drivers / Firmware up to date and problem persists. All hardware diagnostics from Dell are Green no Problems or Warnings.

Usually When the Server is under load (many CAD08 Users using Civil3d & 8am Users logging in) The system will just Freeze for a Few seconds.) Then Resume. At first I thought Might be an AutoCAD issues or network Issues. But I Removed all old network hardware and implemented all new Cisco Switches and problem persists so I know without a doubt that the problem is in the Server. OS or Hardware?

Thought because I had two DNS' and a backup DC that that might be the issue but dropped the second dns from the DHCP and set my machine to static and connect to the same gbit switch as the server and problem is consistent for me during these outages as well.

When I RDP to the Server during these times I am able to connect however the console won't load until the freeze has passed.

Not many out of place errors on the server except there is a Master Browser showing up recently several times a day. Unable to retrieve list of computers from the master browser" this is the DC so I 'm not sure why its not itself the master browser or able to speak effectively to the other DC on the same GB Switch.

Ideas and tests would be wonderful.

I am currently thinking hardware but my configuration could just as easily be the issue but never had this issue before and have had much heavier loaded servers (just not with 900Gb on one server though in storage 50% used and still going though pretty good exercises)

CAD Drawings being used are typically not too big like 3-20 Mbytes and then Reference 10-20 other things on the network as well. Like Arial Images or whatever in Tiff / Jpeg Form. These are the larger files that are opened. Sometimes 100MB or more... however these are view only but still poses a large amount of file use...

again let me know the thoughts...
I am more than willing to listen but I have a pretty much 18 Hour shop so even weekends I don't get much testing time... But I want the issue solved!

4 replies

by Former member

Two things come to my mind when reading your post:
1) Harddrive(s) need defraging or need replacing due to being too old or are on the wayout.
2) Need more memory due to heavy usage.

Just this weekend i had all five backup harddrives go down all at once, so make sure that you have a good backup of your server(s)/computer(s).

Please post back if you have anymore problems or questions.

by viperiii

Good place to look...
Data Drives say they are okay... but an extra Defrag won't hurt tonight...
Thinking the OS drive was needing one more though... so Both it is...

See how that works out and post back...

by viperiii

Updated Firmware of Backplane.

Updated Broadcom NIC Drivers (usually a source of issue for many Dells)

Set Read Cache on Perc5 Controller to Adaptive read and set Writeback
(Had noticed some very high levels of Disk Que Lengths)

Tested all memory with Memtest86+ plus also tested with Dells built in MPMemtest which is much better than their typicall memory testers. All with no errors.

Updated Open Manage Server Administrator and saw that my Perc 5 Raid Controler Driver & Firmware are both outdated but shouldn't be causing this issue.

However I'll post back tomorrow and see if its any better

This discussion is closed to new replies.