Discussion Locked

7 pc's on lan

0 helpful
9 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.
Two pc's can c each other on network(1 runnung winme. the other win98se)The other 5 pc's can c each other ( all running win98se).I'm using a 8-port hub. Why can't 7 c each other?

9 replies

by hockeyman

One possibility is that there is still a browser war going on between the pcs. Meaning one of the 7 is wanting to create a database of mac or ip addresses to computer name, just like an arp table, and they're holding an election to see who becomes the master browser. These elections can take up to a few hours to resolve themselves. One other possibility is that the subnet mask on the 5 that see each other are the same, as well as the other 2. Just make sure all the masks are the same. But leavethe pcs running over night and see if anything appears in the morning.

by bhaney

You have not given us enough information but here is where I would start:

1. Go to the machines that can not see anything and see if you have link lights on the network card and the hub. If you don't, you have a physical problem or possibly a network card driver problem.

2. If you have link light start pinging each of the ip addresses of the other workstations. If you get responses from any of them then you know your TCP/IP stack is configured correctly. If not, you need to reinstall TCP/IP and configure it correctly.

3. If you are pinging the other workstations but not seeing them in network neighborhood make sure you are part of the same workgroup (or domain) and that you have different workstation names. Try pinging by computer name. If you are resolving it to an ip address then you know that netbios is installed and working correctly. If not, try reinstalling all your network services.

by laerma

Just curious do you have internet sharing on any of these computers. Has it ever been able to see each other

by rick.bigsby

Could be in your security settings.
by default sharing of disk resources and printers is turned off. You have to grant these resources. second is to confirm you are using the same workgroup.

As mentioned could be several other things
IP settings card settings etc.

This discussion is closed to new replies.