Hi, I’m a novice with networks and have a question regarding setting up a Netgear WN-802T access point.
There is a T1 (192.168.100.1 local IP) > DLink DSS-16+ switch with a DSL line > Linksys BEFSR81 Router
IP 192.168.100.120 (local IP 192.168.10.1)
Subnet 255.255.255.0
Default Gateway 192.168.100.1
DNS servers for our host.
DHCP Disabled and the starting IP is 192.168.10.100 ranged to 192.168.10.149 for connected devices.
Computers that are connected to the router have 192.168.10.1 as their default gateway and DNS.
Where do I connect this AP to get internet access only and with what settings? I have tried to setup the AP’s IP within the range, outside of the range with no resolution. How do I not allow access to files on my wired computers?
Any insight would be greatly appreciated.