Question Locked

AD authorization problem

0 helpful
3 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

Hi,

I have a network of 4 sites linked with e-line (ethernet) with cisco routers on every site. When the pcs from the remote sites try to connect on the DC (2003) on the central site they get the error that domain is not available...and will log you on with your roaming etc. We can ping, tracert, dns, domain everything is ok. VoIP works fine. You can also remove the pc from the domain but you can not join the domain from the sites as we get the error that domain is not available.
We tried everything but its always a dead end. No firewalls or filters are installed anywhere on the sites.

Any suggestions......???

3 replies

by wizard-09

Have you tryed to ping the FQDN on the domain, can you map to the domain from one machine i.e \\servername\c$.

Is there only one domain or many domains, maybe it's down to a dns problem that it cant resolve the name of the server try inputting a lmhost file to one of the machine and see if it then can see it.

by cg it

If you can ping the DC, and workstations TCP/IP DNS server address properties point to the domain DNS server, and that will resolve the DNS query for a domain controller to the domain's domain controller, then workstations should be able to reach it and authenticate.

Unless you have the rights to join workstations to the domain, you won't be able to do so.

If you use access lists on your Cisco routers and have not specifically allowed traffic from workstations to reach the DC, that traffic will be blocked. Access lists when enabled on Cisco routers deny traffic unless specifically allowed.

If you have not setup sites and associated subnets to the sites in Active Directory Sites and Services, then that's a possible reason but then if you manage the Active Directory based network, you probably already have configured that.

This discussion is closed to new replies.