Discussion Locked
0 helpful
3 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.
I have an ML530 server with a RAID level 5 using 5-36gig SCSI drives. The NetWare OS is already installed but as an after thought we are attempting to add another 36gig drive. Can I add the new drive without losing my OS configuration and what is the proper method in doing so?
3 replies
by mark-vent
Yes you can do this, you can use the COMPAQ ARRAY MANAGER (use a SmartStart CD) to add the disk to your array (this will take a LONG TIME! and I mean a LONG TIME (i.e 12hrs)) once this is done, create a new volume on that disk and add it to your existing volume (more waiting) all done.
We had to do this when rebuilding a server as NW5.0 install wouldn't run properly so we had to install half the disks, install NW and then add the remaining disks. It took a while but it worked fine ..
by 2ndchancepc
Poster rated this answer
by 2ndchancepc
This question was closed by the author
This discussion is closed to new replies.
Trending Networks posts
Sort by Trending
Question Unanswered
How Can IT Teams Detect Hardware Bottlenecks in Business Networks?
0 helpful
0 replies
Question Locked
Using multi-NIC setup for NAS + router — better than VLAN?
0 helpful
4 replies
0 helpful
5 replies
Question Locked
Unknown device connected to my network
0 helpful
2 replies
Question Locked
How to change public IP without ISP?
0 helpful
2 replies