I have 2 subnets: 192.168.1.0/24 and 192.168.20.0/24. I’d like to join the subnets. The .20 network already has a router with an interface that will accept traffic bound for this network. The .1 network has a Cisco PIX 506e, which has a single inside and single outside interface. I tried adding a static route on the inside interface to the .20 network, but it didn’t work. I suspect I need either a) a router with a 3rd interface or b) create sub-interfaces on the PIX. As I am not too familiar with creating the sub-interfaces, I was thinking of a 3rd option: create static routes on the 2 windows PC’s that will be accessing the .20 network. It is only these PC’s that will access the .20 network, so maybe this is the easiest/cheapest option? Thanx for any help..