Discussion Locked

Can't connect to server by server name but can through server IP

0 helpful
6 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

Hi,

I have just configured a Nortel LG AX-IAD100 router/modem and all our PCs on the newtork can access internet and email.

3 of our PCs (running XP) cannot connect to our server (small business server 2003) using the server name. Although these PCs can connect using the server IP address.

This is causing headaches with printer access etc. And all was fine using our previous Belkin router/modem.

Please help - I'm stumped.

6 replies

by kinohead

From your description, it sounds as if you have computers with other OS that ARE able to access this server in the method you desire; true? Or is it that just THESE 3 PCs are unable to connect?

Are the PCs all on the same network segment?

Sounds like an Intranet (behind the firewall) DNS server is not being accessed by these machines; where is your Intranet DNS server or do you have one?

by kdoanconsulting

You have suggested looking at how the workstations resolve names, but how do you want us to do this. I have the same issue of "disappearing" server when browsing on "Entire Network" in XPPro. Can map drives using server name and share but not by browsing. Thanks.

by kdoanconsulting

We already have DNS running on our one and only server with Active Directory. Maybe I have configuration settings wrong. I'll try following the instruction you gave in your post. I didn't mention that our server has two NICs and I believe that is causing some of the errors. It doesn't seem to know which card to use. It registers two DNS servers (one for each NIC IP) and DHCP is running of the NIC IP for what I thought was the card for outside VPN. Thanks for the info.

by fiponcejr

If you can connect to the servers using their IP maybe the problems can be solved by configuring your WINS.. Hope this helps you...

This discussion is closed to new replies.