Networks

Ask something
Discussion Locked

Can't Disable Print Banner & Notify

0 helpful
9 replies

by cst

Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

We are running Netware 4.2 for Small Business, and recently updated our Win2K clients from ver. 4.80 to 4.83. Two out of 3 of our workstations had no problems with the update, but the 3rd one that has to also run Microsoft's Netware Client because of ARCserve is having a big problem -- even though "Notify" and "Banner" are turned off (unchecked) in the Netware printing properties, we still get that pesty banner page preceding all print jobs, and a notify popup once the print job is complete. We have searched Novell support for a solution (listed as a known issue), but none of the fixes seem to work. One suggestion was to enable those properties, restart, then disable them again...no good.

Anyone have any solutions to this irritating situation??

9 replies

by highlander718

You should have a CSNW option under Control Panel, that is another place you can find the setting you need to disable.

by malibu81

Start Settings Printers

Right Click on the Printer and left click properties in netware settings tab uncheck enable banner uncheck notify uncheck hold and keep click OK

Right Click on My Network Places Left click properties, Right Click Local area connection
left click properties highlight Netware Client left click on properties. In the Default Capture area Settings are the same unchecked as above.

Frank

by cst

Thanks, but I had already checked that, and the options were not checked.

by edb

There is a patch for 4.83 follow the previous answers then apply the patch. This should resolve your problem.

by msarazen

Also check in your Client properties, under the Default Capture tab. There's a notify box and banner settings area there as well.

Hope this helps

Mark

This discussion is closed to new replies.