Discussion Locked

Can't find Domain Name controller

0 helpful
3 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

Connecting Mac G4 to NT Network through
Virtual NT PC client. After assigning to
correct Domain receive message, "Cannot find
Domain Name Controller" Any suggestions

3 replies

by dcassat

Generally this problem is one of the following...

You are not getting an IP address. Enter an unused address manually to test this.

You have a problem with the client software or network protocol. You may have to reinstall them to test this.

You have a defective network card.

You have a defective patch cable.

The hub port that you're plugged into is defective.

These are in the order that they commonly occur. I hope this helps.

This discussion is closed to new replies.