Discussion Locked

Cant see my domain

0 helpful
6 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

Hi i have just setup and installed a SBS 2003
i cant seem to ping the domain name? not even from the server?>
so i cant join anyone to the domain.
The other problem is pc's using Home edition obvioulsy cant join the domain, how do i get them to see the server? if at all possible.
any help would be appreciated.

6 replies

by sgt_shultz

man, there must be a special on sbs or something...
xp home can't join a domain. that is a nasty gotcha from ms. but you really should know that one so big red flag for you: stop and do homework. you can find stuff like that out by lurking at www.microsoft.com and support.microsoft.com and reading what looks relevant...
so xp home can't join a domain. it can join a workgroup with the sbs2k3 server. the win2k3 server will need Local user accounts for the people who'll be using resources on it...and you will be mucking right away with the way microsoft intended you to use sbs maybe...
(sound of soapbox being pulled out)
this is the trouble with SBS. new folks never leave it alone. and it is made for new folks to leave alone...
i'd call microsoft about this. you will have free support for a while if you just got sbs 2k3.
you sure need to get ping working. sounds like you cannot ping by name. can you ping by ip address?
turn the firewalls off on the xp boxes while you test this.
ms is gonna tell you to put the latest sp's and critical updates on server and clients so maybe start doing that also...

by bfilmfan

Did you set up DNS on the server?

Did you configure Active Directory properly?

I agree with Sgt. You might want to spend some time reading over the technical documentation on the product.

by cg it

Microsoft sales and marketing is pushing the Small Business Server area so lots of people are buying it.

Where the thing with SBS. It works best with 2 NICs. One for WAN and one for LAN [its designed as all on one box]. When you install SBS 2003 you need to assign an IP address to at least 1 NIC [best to use a private Class C 192.168.1/24 which is the default for whatever NIC you'll use for the LAN. Assign the other NIC the WAN addresses including the default gateway]. Won't install without an active connection. That NIC becomes your LAN. SBS then configures everything for you [Wizards whew, god knows what they do sometimes and they aren't failproof]. DNS,DHCP, etc. After the Wizard does all that, your presents with what additional programs you want to install. Exchange 2003, ISA 2000, SQL [if you bought the Premium Edition]. After you get all that installed [and theres a reboot] first thing you have to do is is check to make sure the LAN Nic is enabled. SBS for whatever reason sometimes disables the active NIC [which could be your problem].

Once you check that and you still can't ping anyone, check your hardware. If you still have a problem, and are running 2 NICs check to make sure the correct NIC for the LAN is actually connected to the switch. If all else fails, reinstall because somewhere during installation a network configuration error occured [which the Wizard does for you and god knows what the wizard did]during the installation.

by hal 9000

Just on more point here which has not been covered you can not mix Gigabite and 10/100 T base NIC's together as neither will work so if the M'Board doesn't have 2 NIC connections ,make sure you use the right type of NIC card that is the same type as built onto the M'Board.

Col

by hal 9000

The proper way to connect XP Home to a Domain is to upgrade to XP Pro but you can get away with a small number of machines hanging off an XP Pro unit again with 2 NIC and using all the Home {up to 5 although the Pro unit may support 10 simultaneous connections you'll have to suck it and see as I don't know how well that would work} on a Workgroup which is a sub unit of the domain.

by trancce

In regards to the XP home users on the domain. We have a trick where I work in which we have a AD domain and most PCs have XP Pro. However, for the few that have XP home, we simply join them to a workgroup with the exact same name as the domain. They already have an AD account so you simply match the username/password on the local PC with that of the domain and they slide right through and are able to use the resources. However, there are no AD perks, of course. Simply map a drive, etc. and they have sufficient permissions to use the network's printers and drives.
That solution works well here.

This discussion is closed to new replies.