Question Locked

Cingular wireless card, ICS, Vista, IP addy conflict

0 helpful
2 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

2 computers.
Computer 1, Laptop, Vista Home Premium,
2 LANS
Cingular- Sierra wireless 875u G3 for internet service (Local area connection 2)Receives ip from dhcp valid wan ip, ICS on this connection, Private network

NIC (Local area connection) reeieving default ip from ICS of 192.168.0.1
Computer 2, Desktop, Vista Home Premium, 1 LAN, Local area connection receiving ip from Laptop of 192.168.0.52, Private network.
The ICS works GREAT, for a random amount of time- 10 minutes -3hours, but then loses the internet connection, I spent 3 hours on the phone with cingular the first 30 min of which they tried to say was not a cingular issue- however-, the event log says that the ipaddress 66.108.x.x was conflicting with another computer or device on the network and the device was disabled, the next log was also error saying the ip address 66.108.x.x was denied by the dhcp server, those are wan addresses on a wan network, yes? shut down comp 1 and reboot and restart reset the lan 3 and the lan to private and then connect to internet and all is good, for a random amount of time- 10 minutes -3hours. I sat not touching a thing as the LAN3 on the comp1 suddenly went to "Identifying Network" and when it was done both of the lans were set back to public and had to start all over again. Please help, I have always been able to find the answers here and if you need more info I will do whatever. This is for a customer so its costing me money btw :-)).

2 replies

by dfmerrifield

Hey Shawn! I see you have had the same trouble I have had a few times in the past. It is not anything to do with your singular service. You most likely are using Mobilink with your Sierra Wireless card? Or, an other one like it. The problem with the Mobilink program is it automatically puts up a high speed (?)LAN connection as Local Area Connection 2 on your PC/Laptop. But, the downfall is it also installs a backup as G3 Connection too. If you don't disable the auto connect in the G3 Connection, it will want to create a dial up connection for you even after you are already online with the Local Area Connection 2. This is your conflict. I have seen it so many times myself. I live in a rural area with no dsl or cable in the area and I've had everyone I know out here has go to using G3/UMTS. I am using an Ovation MC950D and it has done it to me lots of times even after deleting the G3 connection, it just pops up on it's own. So, You have to make sure that you un-check the auto redial if line is dropped, and the biggest one that causes all the hoop-dela is to make sure it is not set as default connection. This will cause it to dial up even if you are connected already to the internet by way of LAN. When it does start to dial it will disconnect from the Local Area Connection and at the same time try to dial up at the same time causing a system error saying that there is another Private network. And it is not lying either!!! Your dial up network is and will be a different IP address every time!

Good luck and hope this will help a lot of others who are having this same problem. Just in case someone may not find the set as default connection, go to control panel/network connections and right click on all dial-up connections (just to be sure) but, mainly G3 and un-check the set as default connection and then properties in same pop-up and un-click redial if line is dropped. Simple fix for a lot of headaches...

This discussion is closed to new replies.