Question Locked

Cisco 1711 Router configuration

0 helpful
3 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

Our parent company closed, and I was given a 1711 in brand new shape. We use a Linksys BEFSR41 router. The only thing we do that is a little different is that we have 5 PCs setup with RDP, using a different port for each one; 3389 - 3393. All I want to do is setup a basic firewall to prevent intrusion, and allow access to the internal clients that need RDP access. I have looked at many articles on the on the Internet, and read the book "Cisco routers for the desperate", but I can't find just the basic IOS or SDM configuration fo rwhat seems to be a very basic setup. Most articles and the book go right into the areas I have no need for, and assume that the reader already knows the basic configuration commands.

I'm comfortable with the IOS command method, since it is very similar to how a Lnatronix terminal server is configured (showing my age).
Any help appreciated. Thanks.
Richard

3 replies

by marcaccini

R_DARLING,

Let's assume that you are using the following subnet on your LAN 10.250.10.0/24 and your desktops that are using RDP are hosts 10-13. Your outside interface is FastEthernet0 and for this example is using 192.168.1.1 as an IP address. We will setup a simple NAT translation from the outside interface to the LAN hosts forwarding the ports while filtering with an extended access list.

See the example configuration below:

interface FastEthernet0
ip address 192.168.1.1 255.255.255.0
ip nat outside
ip access-group OUTSIDE-IN in
int Vlan1
ip address 10.250.10.1 255.255.255.0
ip nat inside

ip access-list extended OUTSIDE-IN
permit tcp any host 192.168.1.1 eq 3389
permit tcp any host 192.168.1.1 eq 3390
permit tcp any host 192.168.1.1 eq 3391
permit tcp any host 192.168.1.1 eq 3392
deny ip any any

ip nat inside source static tcp 10.250.10.10 3389 192.168.1.1 3389 extendable
ip nat inside source static tcp 10.250.10.11 3389 192.168.1.1 3390 extendable
ip nat inside source static tcp 10.250.10.12 3389 192.168.1.1 3391 extendable
ip nat inside source static tcp 10.250.10.13 3389 192.168.1.1 3392 extendable

Just replace the ip addressing with the addressing of your company and this should work for your needs.

Good Luck!

MM

This discussion is closed to new replies.