I would greatly appreciate if someone could assist me with the following problem:
It seems like my home router configuration is stuck in a routing loop or something
Here is my configuration
FIOS Router is connected to ISP
192.168.1.1
Default Gateway for all hosts on the 192.168.1.x subnet
There is a static route on the FIOS Router to send all traffic to 10.20.20.x via 192.168.1.254
Cisco 2600
Fastethernet 0/0 : 192.168.1.254 directly connected on the same switch as FIOS Router 192.168.1.1 ( dumb switch)
Fastethernet 0/1 : 10.20.20.1 directly connected to an 8 port (dumb switch) with a single host on the same switch (10.20.20.2)
Gateway of Last Resort : 192.168.1.1
Here is my dilemma:
Hosts on 192.168.1.x can traceroute to hosts on 10.20.20.x subnet and the packet get there in 2 hops from 192.168.1.1 to 192.168.1.254 to the destination, no problem
Hosts on 10.20.20.x unable to get out to the Internet or ping 192.168.1.x hosts; however, a host on 10.20.20.x can successfully ping the FIOS router 192.168.1.1
Have I created a routing loop inside the Cisco 2600 ?