I am having a issue configuring my 2950 switch with multiple VLans. The switch has 24 ether ports and 2 100BaseFX ports. This switch is connected to a ProCurve switch which is connected to my default gateway.
Now for the issue. I have 3 Vlans configured on the 2950 and each has 8 ports assigned to it. When Connect to each of the Vlans, I am unable to pass traffic outside of that vlan. Port 25, which is the 100BaseFX port, is connected to the Procurve and is still in VLan 1.
The 3 VLans do not and should not communicate with each other, but all three do need the access from the default gateway to the internet. Simple question, How can I send and receive traffic from each VLan over Port 25 which is still in VLan 1.
Also note that the 3 VLans do not have assigned IP Addresses as these will be changing.