Hi,
From last one month I’m trying to properly config router and connect to internt through this router. I’m really depressed working with this router. When I check sh ip int br, it shows me the ports ATM0, ATM0.1 in initializing state. I checked the router with different ways, but couldnt connect to internet. Following are configurations; Please help me and give me a clue why I’m not able to connect this router to internet. It would be really appriciated:
This is the running config of the router: 192.168.0.1
—————————————————————————-
!version 12.3
no service pad
service tcp-keepalives-in
service tcp-keepalives-out
service timestamps debug datetime msec localtime show-timezone
service timestamps log datetime msec localtime show-timezone
service password-encryption
service sequence-numbers
!
hostname yourname
!
boot-start-marker
boot-end-marker
!
logging buffered 51200 debugging
logging console critical
enable secret 5 $1$78uq$xaFFkE.APjni1Htk20dhd/
!
username maxteleco privilege 15 secret 5 $1$EEtz$i5bSKh7Pn6nmmNYgVRrcF0
clock timezone PCTime 0
clock summer-time PCTime date Mar 30 2003 1:00 Oct 26 2003 2:00
no aaa new-model
ip subnet-zero
ip cef
ip dhcp excluded-address 192.168.0.1
!
ip dhcp pool sdm-pool1
import all
network 192.168.0.0 255.255.255.0
default-router 192.168.0.1
!
!
ip tcp synwait-time 10
no ip domain lookup
ip domain name yourdomain.com
ip ssh time-out 60
ip ssh authentication-retries 2
no ftp-server write-enable
!
!
!
!
!
bridge irb
!
!
interface ATM0
no ip address
ip route-cache flow
no atm ilmi-keepalive
dsl operating-mode auto
!
interface ATM0.2 point-to-point
description $ES_WAN$$FW_OUTSIDE$
pvc 0/38
encapsulation aal5mux ppp dialer
dialer pool-member 1
!
!
interface FastEthernet0
no ip address
no cdp enable
!
interface FastEthernet1
no ip address
no cdp enable
!
interface FastEthernet2
no ip address
no cdp enable
!
interface FastEthernet3
no ip address
no cdp enable
!
interface Dot11Radio0
no ip address
!
ssid 1234567890
authentication open
!
speed basic-1.0 basic-2.0 basic-5.5 6.0 9.0 basic-11.0 12.0 18.0 24.0 36.0 48.0 54.0
station-role root
no cdp enable
bridge-group 1
bridge-group 1 spanning-disabled
!
interface Vlan1
description $ETH-SW-LAUNCH$$INTF-INFO-HWIC 4ESW$$FW_INSIDE$
no ip address
bridge-group 1
!
interface Dialer0
ip address negotiated
ip nat outside
ip virtual-reassembly
encapsulation ppp
ip route-cache flow
dialer pool 1
dialer-group 1
no cdp enable
ppp authentication chap pap callin
ppp chap hostname xxxxxxxxxxxxxxxxxxxxx
ppp chap password xxxxxxxxxxxxxxxx
ppp pap sent-username xxxxxxxxxxk password xxxxxxxxxxxxxxx
!
interface BVI1
description $ES_LAN$
ip address 192.168.0.1 255.255.255.0
ip nat inside
ip virtual-reassembly
ip tcp adjust-mss 1452
!
ip classless
ip route 0.0.0.0 0.0.0.0 80.229.71.241
!
ip http server
ip http authentication local
ip http secure-server
ip http timeout-policy idle 5 life 86400 requests 10000
ip nat inside source list 1 interface Dialer0 overload
!
logging trap debugging
access-list 1 remark INSIDE_IF=BVI1
access-list 1 remark SDM_ACL Category=2
access-list 1 permit 192.168.0.0 0.0.0.255
dialer-list 1 protocol ip permit
no cdp run
!
control-plane
!
bridge 1 protocol ieee
bridge 1 route ip
banner login ^CAuthorized access only!
Disconnect IMMEDIATELY if you are not an authorized user!^C
!
line con 0
login local
no modem enable
transport preferred all
transport output telnet
line aux 0
login local
transport preferred all
transport output telnet
line vty 0 4
privilege level 15
login local
transport preferred all
transport input telnet ssh
transport output all
!
scheduler max-task-time 5000
scheduler allocate 4000 1000
scheduler interval 500
end
===================
Regards,
Sajid.