Question Locked

Cisco asa 5505 to ATT DSL

0 helpful
3 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

Currently have a Linksys firewall connected to an ATT DSL provided (and locked down) Cisco router.

Static IP 12.11.200.122 255.255.255.248
Gateway 12.11.200.121
DNS 206.141.192.60 65.43.19.26
NAT on
Internal network 10.0.0.1-210 DHCP 90-210
It works fine

When I configure the Cisco ASA 5505 with the wizard I'm using all of the above with the gateway as a static route on outside and a range of 11.11.11.0-50255 255.255.128 for NAT
everything else is the defaults. I can't get internet connectivity from inside. Any ideas?

3 replies

by mvasquez

set a Global NAT rule from inside network to outside interface (or ip)?

example:
global (outside) 1 interface
nat (inside) 1 11.11.11.0 255.255.255.128

this should do the trick

by mmaltzman

I'm sure this is too late, but for others searching for a similar answer.
You have to create a static route with ip: 0.0.0.0 netmask: 0.0.0.0 and gateway: 12.11.200.121 on the outside vlan.

This discussion is closed to new replies.