Cisco IOS bridging wireless - TechRepublic
Question
June 30, 2009 at 04:59 AM
sprelligosi

Cisco IOS bridging wireless

by sprelligosi . Updated 17 years ago

I have access to internet via ethernet and i can connect to the the ssid via the wireless but i think there is some problem with assigning the wireless to the dhcp pool. i get the following wireless ip address. (which makes me think it dhcp related)

IPv4 Address. . :169.254.96.14
Subnet Mask . . :255.255.0.0
Default Gateway . . :

here is my current config ive been picking my brain on this a couple of days since im relatively new to the wireless world of cisco.

any help would me VERY appriciated.
happy hunting.

Building configuration…

Current configuration : 4280 bytes
!
version 12.4
no service pad
service timestamps debug datetime msec
service timestamps log datetime msec
no service password-encryption
!
hostname Rooney
!
boot-start-marker
boot-end-marker
!
enable secret 5 $1$DGqS$qh1jyp11SjWe0wA0lOYy3/
!
no aaa new-model
!

dot11 syslog
dot11 vlan-name WIRELESS vlan 1
!
dot11 ssid CISCO
vlan 1
authentication open
!
ip cef
!
!
no ip dhcp use vrf connected
ip dhcp excluded-address 192.168.1.10
!
ip dhcp pool DHCP_LAUGIN
network 192.168.1.0 255.255.255.0
dns-server XXXXX
default-router 192.168.1.254
domain-name mydomain.com
!
!
ip name-server XXXX
ip name-server XXXX
ip auth-proxy max-nodata-conns 3
ip admission max-nodata-conns 3
!
multilink bundle-name authenticated
!
!
username XXXX privilege 15 password 0 XXXX
!
!
archive
log config
hidekeys
!
!
!
bridge irb
!
!
interface ATM0
no ip address
no atm ilmi-keepalive
dsl operating-mode auto
!
interface ATM0.1 point-to-point
pvc 8/48
pppoe-client dial-pool-number 1
!
!
interface FastEthernet0
!
interface FastEthernet1
!
interface FastEthernet2
!
interface FastEthernet3
!
interface Dot11Radio0
no ip address
no dot11 extension aironet
!
ssid CISCO
!
speed basic-1.0 2.0 5.5 6.0 9.0 11.0 12.0 18.0 24.0 36.0 48.0 54.0
station-role root
bridge-group 1
bridge-group 1 subscriber-loop-control
bridge-group 1 spanning-disabled
bridge-group 1 block-unknown-source
no bridge-group 1 source-learning
no bridge-group 1 unicast-flooding
!
interface Dot11Radio0.1
encapsulation dot1Q 1 native
!
interface Vlan1
no ip address
ip virtual-reassembly
ip tcp adjust-mss 1412
bridge-group 1
hold-queue 100 out
!
interface Dialer0
ip address negotiated
ip mtu 1452
ip nat outside
ip virtual-reassembly
encapsulation ppp
dialer pool 1
dialer-group 1
ppp authentication pap callin
ppp pap sent-username XXXXXX password 0 XXXXX
!
interface BVI1
ip address 192.168.1.254 255.255.255.0
ip nat inside
ip virtual-reassembly
!
ip forward-protocol nd
ip route 0.0.0.0 0.0.0.0 Dialer0
!
!
ip http server
ip http authentication local
ip http secure-server
ip nat inside source list 1 interface Dialer0 overload
ip nat inside source list NAT_INNI interface Dialer0 overload
!
ip access-list standard NAT_INNI
permit 192.168.1.0 0.0.0.255
remark IP ADDRESSUR PRIVATE
!
dialer-list 1 protocol ip permit
!
!
!
!
control-plane
!
bridge 1 protocol ieee
bridge 1 route ip
banner motd ^CHVAD ER I GANGI^C
!
line con 0
no modem enable
speed 115200
line aux 0
line vty 0 4
privilege level 15
login local
transport input telnet ssh
!
scheduler max-task-time 5000
end

This discussion is locked

All Comments