Hi all,
I am having weird problem on my cisco switches. Let me explain the situation. I have got 3 switches those are interconnected to each other and there is NO redundent link in between.
I am not getting any error message when they are on live. But as soon as I connect my laptop (with a static IP which is not been used anywhere in the network) in any port of my switches, it starts getting the following message. As soon as I unplauged my connect and these error message stops.
Dec 21 09:52:39.216 GMT: %RTD-1-ADDR_FLAP: FastEthernet0/23 relearning 48 addrs per min
Dec 21 09:53:39.215 GMT: %RTD-1-ADDR_FLAP: FastEthernet0/23 relearning 16 addrs per min
Dec 21 09:54:39.223 GMT: %RTD-1-ADDR_FLAP: FastEthernet0/23 relearning 18 addrs per min
Dec 21 09:55:39.214 GMT: %RTD-1-ADDR_FLAP: FastEthernet0/23 relearning 21 addrs per min
Dec 21 09:56:39.214 GMT: %RTD-1-ADDR_FLAP: FastEthernet0/23 relearning 14 addrs per min
Dec 21 09:57:39.213 GMT: %RTD-1-ADDR_FLAP: FastEthernet0/23 relearning 19 addrs per min
Dec 21 09:58:39.215 GMT: %RTD-1-ADDR_FLAP: FastEthernet0/23 relearning 14 addrs per min
I have checked with ‘ debug ethernet-controller addresses’ and the mac address which was causing the issue was my laptop’s mac address.
Any Idea, where am I missing the point?????
Regards
Mohammad