Discussion Locked

Cisco VPN 3005 Concentrator

0 helpful
1 reply
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

Hello,
I am trying to establish VPN connection between Remote Client and Concentrator.
So far I have configured the Address Pool internally to assign ip address and all the
IPSec setting.

VPN Public int = 172.16.65.2 /24
VPN Private int = 10.0.1.1 /24
Address Pool = 10.100.100.10 - 30
Router = 10.0.1.100 /24

I am able to get to the concentrator and the concentrator is assigning ip address to me. Once I am connected, the concentrator won't let ping the router. Currently, there are no filters for the preshared group.I can ping the VPN private int and public. VPN Private int can ping all the ip's
within the network. so I know that concentrator's private int is on the network. However, I cannot make the VPN Client
to get resources on the remote network.

I have added list of network in Network Lists, and still unable to ping the router from the remote client.

Any help is kindly appreciated.

Cheers
day_walker

1 reply

by why me worry?

Please repost in Questions Forum, as you'll get better results there to your questions.

This forum here is for general discussions.

Thank you.

This discussion is closed to new replies.