3 replies
i am having similar difficulties, having just taken delivery of a generation 1 ML370
pwr to mainboard - but nothing else is working and no POST. no CRT display.
I thought maybe someone had installed an out of spec cpu in just for the sale - thought they were only up to 933MHz, this one is 1000MHz.
Just taken delivery of a 128MB video card so I am really frustrated.
Any help appreciated - this is a desktop conversion project.
Greetings mike (?)
i have a possible lead - my info is that if the second cpu slot is not populated then a special terminator card is required.
mine has only the one CPU
without a terminator card in the second slot.
so I have ordered one to try.
I am sure the Seller swapped the matching dual CPU 933Mhz P3 for a single 1000MHz P3 - my info is that at 1000MHz the system may only recognise a 370 socket type (in slot 1 form factor - I am not conversant with the designations)
I have also ordered a proliant spec 933MHz CPU.
I shall make comment in about 10 days time.
regards from Greg
AUSTRALIA
PS - while i was recently working on a PII desktop, it showed these symptoms when an unsupported PIII cpu was installed.
This discussion is closed to new replies.
Trending Networks posts
Sort by Trending