Configure cisco 3650 switch as DHCP client
Dear,
tell me how to configure a cisco switch 3650 as dhcp client
Networks
Dear,
tell me how to configure a cisco switch 3650 as dhcp client
by blue_spring_csdu Accepted solution
by jdclyde Accepted solution
the only advantage of DHCP is huge networks with multiple pcs.
All network devices should always have a static IP address. Makes it much easier to manage and troubleshoot.
I only use DHCP for laptops.
by megacy Accepted solution
I know this is years old but I was doing some searching for some info and this kept coming up in my searches so figured I would actually answer the question, so it MIGHT help someone in the future.
Now why use DHCP on a switch? In production no you would want a static either configured on the switch or via static DHCP mapping. Now if you have 20 of them fresh out of the box need to upgrade the IOS on all of them? DHCP is great!
First skip the config dialog.
Go to the enable prompt
do a config t
select your vlan - int vlan 1
ip address dhcp
exit
select your uplink port - int fa0/1
no switchport
ip address dhcp
and exit, you should now get a dhcp address
This discussion is closed to new replies.
Sort by Trending