I have a leased line between two of our offices connected with CSU/DSUs and GT60 routers. Until two weeks ago everything worked fine — I could see the computers on the other side of the network with Network Neighborhood and print to the remote printers. I then had to change the equipment on the far side due to storm damage and am trying to configure the router again.
When I did this originally it was three years ago and a tech support person from the router company was able to walk me through the setup of the NETBEUI portion. Unfortunately I don’t remember all of the details. I know I have to enable UDP forwarding of Ports 137, 138, and 139, but can’t remember the TCPIP addressing or if anything else needs to be enabled.
The routers work for most traffic except for browsing the network or remote printing.
Thanks for any assistance.
Michael W. Ryder
mwryder@earthlink.net