Discussion Locked

Connecting offsite meeting back to LAN

0 helpful
7 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

We want to send a 'briefcase' out to a remote meeting site that, with little or no configuration from the attendees, will connect them back to our internal LAN.

The idea was to put the attendees on a wireless LAN so they could share informationthen tie that back into our network so they could access email and server shares.

The 'WAN' connection from the hotel could be a simple phone line so it would be a direct call into the LAN with no need for vpn security. Or (hopefully) a connection via the hotel ethernet Internet connection in which case we want to use our Cisco VPN solution.

I'd hoped to be able to config a Win2K laptop using ICS. It almost worked too. I hit 2 snags; ICS wouldn't pass WINS settings to the clients (still an NT domain). 2nd, if I fire up the cisco vpn client (even with local lan access enabled and firewall turned off) the 'gateway' machine can ping the clients but they can't ping it.

Thoughts and notions would be appreciated.
ks

7 replies

by r. a. caluste

true you couldn't pass wins settings to clients, there is no wins proxying in ics, so either use broadcast to resolve netbios names or configure and implement an lmhosts file for each client. create a standard LMHOSTS file, put it on a diskette, create a batchfile that will install the LMHOSTS file into the client's machine.

hope this helps.

by joseph moore

Instead of using the Cisco VPN client, did you try setting up the built-in Win2K VPN client? In it, you can specify the WINS server IP address (amongst a whole other bunch of settings).
Try it. Open Network and Dial-Up Connections, double-click onthe Make New Connection, then select "Connect to a private network through the Internet." That is the VPN option.
Set your VPN gateway when it asks for it.
You will have to set the proper encryption level and authentication settings, but it soundslike you know those.
Now, one option on the Win2K VPN connection is it can either dial a normal dial-up connction first, or not and use an existing dial-up connection. I would suggest you leave it to not dial up a connection first.
And set the WINS settings in this connection. That would make the LMHOSTS file not necessary.

hope this helps

by nathanh

We always send a firewall/router/switch to conferences the router has to be configured to match the hotel's IPs and then set up an IPsec VPN tunnel to the VPN servers in our offices. Then all the clients can connect to the firewall and no configuration is neccessary (assuming DHCP in your office and the firewall/router). We back this up with a modem card on the firewall that is preconfigured to dial the ISP and has the tunnel info already in it, in case there is not a broadband connection. We have used Netopia, Symantec, and SonicWall small office router for this purpose.

by kevin.square

that's what I'm trying to set up but the meetings will be somewhat adhoc and there won't be any IT support on site so I need to try to keep it simple.

think we're going to go back to vpn client on each laptop and an access point for connectivity. I understand the access point can connect directly to a hotel network. Will have a second solution of a small router with async card for when dialup is the only avail. option.

This discussion is closed to new replies.