Question Locked

Disabling the router function

0 helpful
3 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.
I have a Linksys wireless AP with 4-port router/switch. I already have a stand alone router. Will it function as an AP if I don't plug in anything on the WAN port?

3 replies

by rkuhn040172

Not as familar with Linksys as D-Link but the concept is the same, just different screens.

Connect router to router via LAN ports. Turned off DHCP on second router, assign the same IP to the WAN and LAN, and I think that's it.

Been awhile since I've done it. If you can't figure it out, I have a D-Link DI-614+ downstairs configured just this way I can plug in and help you with. It's currently collecting dust.

But yes, it is doable and alot cheaper than a real AP (retail) especially if you already own it.

And, if you think about it, there are some benefits. Using MAC filtering, IP filtering and firewall rules on each router, you are more or less controlling traffic flow by controlling what devices can use which router. Almost like a VLAN.

You can control traffic flowing upstream or downstream.

This discussion is closed to new replies.