Discussion Locked

DNS through VPN

0 helpful
8 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.
We are running VPN through BorderManger 3.6 on Netware 5.1 servers and Novell DNS/DHCP on our Border server. We are running some of our remoter users across DSL and so are using IP only. VPN and Novell login are working fine, we have set up the IP so that a Crosstalk app we run can access a server on the private side of our Border server (access by IP number). Our problem is that the client PCs coming in through the VPN cannot run Internet Explorer because there is no DNS name resolution. Everyone has IE set to use the BorderManager proxy services, that is working fine on the LAN side, but not for the VPN clients. We have searched the Novell Knowledgebase to no avail. Any suggestions, ideas, pointers ?

8 replies

by turambar386

I am assuming that when you say that they cannot run IE because there is not DNS, you mean "they cannot use IE to connect to internal resources because they have no access to the internal DNS server".

Is that correct?

If not, please clarify what resources your remote users are trying to get to.

If so, you have a couple of choices:

1) if there are only a couple of web servers they need to access, use HOSTS files on the clients with the IP addresses of those systems. OR
2) set up the TCP/IP stack on the client machines to use your internal DNS server as a name server. Unfortunately, this could cause all kinds of other nasty problems.

Hope this helps. Checkpoint has a nifty way of getting around this problem called "Split DNS", but that doesn't help you...

by jimbb

Do I get it right, and are your users connecting to BM (and your LAN) via the VPN, and then trying to get on the internet from there? I may have bad news for you, but as far as I know you cannot surf via Bordermanager's VPN. It's either an internet connection, or VPN, this is one of the current limitations.

Jim

by estebandelatorre

If your clients start the tunnel (VPN) to another server, you won't be able to access the internet at the same time. This is the core of a VPN, the way they work and the only way to make them secure.
In order to surf the internet, you will need to stop the tunnel first.

But , if you need to reach a machine by name rather than IP, load it's IP and Name in the system32\etc\hosts file.

This discussion is closed to new replies.