Discussion Locked

ethernet tp crossover cable

0 helpful
9 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.
the cat_5_patch_cable_guide is not clear on creating a crossover cable. is there a better source or guide on the net than this one? Or can some one send me a diagram on the cable.

9 replies

by omaq

Crossover Ethernet Wiring Configuration

Plug 1: Orange-White Green-White
Plug 2: Orange Green
Plug 3: Green-White Orange-White
Plug 4: Blue Blue
Plug 5: Blue-White Blue-White
Plug 6: Green Orange
Plug 7: Brown-White Brown-White
Plug 8: Brown Brown

http://www.pyeung.com/crossover.html

by cavedweller

I use the Black Box catalog as a general reference for cable pinnings. (Their prices are sky high though and I buy my equipment elsewhere.)

by rileylk

Looking at the RJ45 connector, let the wire hang down and point the side with the tab away from you. From left to right, the cable positions are 1 through 8 with 1 being orange-white and 8 being brown.

Cut the connector off and swap 1 and 3, andswap 6 and 7. The result will be:
1 blue-white
3 orange-white
6 brown-white
7 green

The other 4 you can cut out if it makes puching it down easier. That is the basic transfer/receive swap.

This discussion is closed to new replies.