Discussion Locked

Exchange: Can't Auto Forward To Internet

0 helpful
10 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

Our company is using Microsoft Exchange Server 5.5 SP4 currently. The OS used is Microsoft Windows NT Server 4.0 SP4 running on a DEC-321064 computer (Alpha platform) - 275MHz speed and 256MB RAM.

Using MS Outlook, we've tried to set autoforwarding to an external SMTP address using either Inbox Assistant or Out of Office Assistant. However, messages were not forwarded.

But if the rule was configured to forward messages to an internal e-mail address, messages were forwarded correctly.
We did not face this problem when we were using Exchange Server 5.0 previously.

I saw an article in Technet (article ID Q216397) which seemed to provide the solution. I've applied the steps but the autoforward problem was not solved! Another related article was Q192982.

Can anyone help me? This problem has been bothering us for quite some time.

10 replies

by william shipway

Haven't looked at the Q articles you mention, but...

Open the properties window of the Internet Mail Service connector (IMC) on the exchange server. There is an "Advanced options" button on the Internet Mail tab. Within this window are check-boxes for disabling Out of Office and Automatic replies to the internet - you may need to de-select these.

If that's not the problem then it may be a problem routing external mail addresses, but that would be unusual because I assume you can alreadysend messages directly to external addresses?

HTH
William

by william shipway

Forgot to say that you may also need to stop and start the Microsoft Exchange Internet Mail Service in Control Panel / Services, before the change takes effect.

by tohsoon28

Dear William,

Thanks for your answer. FYI, the solution you gave me is the solution in the TechNet article Q216397. I've tried that before but things didn't seem to work. So far, we can send messages directly to external mail addresses.

Any other solutions?

by leebs

Try this:
1. Go into your Exchange Server and make Custom Internet Mail Recepients for each mailbox that you want the mails to be forwarded.
2. Go into the mailbox of the users and put a check on a box that says Forwarded to, and then select the internet recepients that you want the mails to be forwarded.

This should work based on your questionaire.

by william shipway

Do you have any other SMTP servers/gateways between your exchange server and your internet connection? If so check that they are processing the autoforward messages correctly - maybe look in log files, or if you can monitor processing in real time that might be easier. It may be that they are somehow confused by the envelope addresses.

by gmscne

Have you tried setting Delivery to an "Alternate Recipient" for the user consisting of an internet address? This method always works but requires someone with Exchange Administrator to make the switch.

This discussion is closed to new replies.