Discussion Locked

expansion port VS CrossOver Cat 5

0 helpful
3 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

i'm using 3com Superstack II Hub 100 in my network and recently i bought a switch .

I just wanna know can i improve my network performance by connecting all my hub using crossover cable individually to my switch instead of stacked hub using expansion port ?

3 replies

by some guy in seattle

You can. When you connect hubs via the backplane expansion port you are creating a large virtual hub, and by a hub's definition, a large collision domain. That is, five 24-port hubs stacked together will equal one 120-port collision domain. You will experience problems in this scenario.

However, each of those hubs connected to their own switch port will end up with five 24-port collision domains. Although the physical speed will not increase, the issues with network saturation will be severely reduced, thereby improving network performance.

I generally try and give each hub its own switch port if possible.

Hope that helps -

by walter_loh

well , i try with manay products , 100 base hub , switch , it just slow down my network .

I'm have 8 3com Superstack II Hub 100 in my network , i wqant to expand it without losing my current speed better still if will increase the speed of my network .

This discussion is closed to new replies.