Discussion Locked

Failure in logging the server

0 helpful
1 reply
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

hi to all,

we are using netware 5, it runs smothly for several years but it suddenly failed to bind the ipx protocols at this time. i'm so worry since all station could not connect to the server and even the server it self is failed to log in.. the server succesfully mount the sys volume and even the other disk volume the only problem is the directory services is failed to initialize..we found out that dsloader.nlm has a problem when initializing... what we are trying to do is to transferor backup the important data from one of mounted volume in the server but the problem is how to copy the data from one of the mounted volume to another drive in the server since the workstation failed to connect. is there any way to copy a certain mounted volume to another drive using the server itself of netware 5 like by copying a file from one drive to another or what may the cause of failing to load directory services ? hope somebody could help...

holden

1 reply

by wcraigmiles

If your drives are visible from DOS, some RAID cards have DOS drivers, get a copy of Capt Nemo from www.novellshareware.com. This utility will allow you to access the novell partition from a DOS session. You can use novell vlm's for the network card, connect to another server and then copy the data across. The main issue is if any of the data has been corrupted. Whatever you do don't copy the system directory or the NDS files themeselves. Just copy the needed data.

This discussion is closed to new replies.