Networks

Ask something
Discussion Locked

Fiber to Ethernet switching

0 helpful
5 replies

by d.walker5

Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.
I?m setting up one LAN between two buildings 650 feet apart. Building number # 1 has 20 XP pro boxes, building # 2 has 24 XP pros. Two servers, both in building 2: server #1, Unix based, will be used exclusively for accounting, server 2, is Windows 2000 and its? primary use is to provide Internet connectivity, with some file and print sharing. A T-1 line provides Internet connection. The internal cabling in both building is 10/100 Base T while fiber connects to two buildings. I?m asking for suggestions for switches to convert the Ethernet to fiber than back to Ethernet. Also, any special cabling and/or other suggestions for accessories to make the setup go easier.

5 replies

by ispnetworker

Your fiber length is short enough that you can utilize MM fiber (62.5/125) utilizing 1000BaseFX/LX/SX spec. Gigabit connectivity will provide you with excellent headroom to accomodate most current or future applications/requirements. There are a number of switches available to do what you need. If you have an installed base of infrastructure equipment that you are happy with, I would look for a solution from this manufacturer. The manufacturer and product you choose will depend on your pricesensitivity, local support availability and additional features you require. A short list of manufacturers with products to fit your needs include Foundry Networks, Cisco, Extreme and 3Com.

by nettek

3Com 4300 Switches with an additional 100BaseFX module will do what you want. Cisco and other vendors can also provide solutions.

This discussion is closed to new replies.