Discussion Locked

File transfer in Bursts on W2K

0 helpful
2 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

Hi All
I have a mixed environment, from choice, with W2K servers and workstations, XP and Win NT linked on a 100Mb/s network. When I transfer large files between any pair of machines it is extremely slow, with short bursts up to 60Mb/s. A 100MB file can take 10 minutes and I often get "Specified Network name is no longer available". Even using a cross-over cable between 2 W2K workstations is the same. Any ideas why this is happeneing and how can I get my network up to its optimal speed?
Many thanks
Tim tnorris@notesafrica.co.za

2 replies

by mshavrov

First of all, try to transfer files by another protocol. For example, run FTP Service on W2K Server and use FTP client on workstation. If you will have stable transfer rate, problem may lie down in Microsoft Networking configuration. If you have stable network environment (you don't add/remove workstations and servers every week), you may just create LNHOSTS file with all servers and distribute it among workstations. If you have HUB, try to use network sniffer to watch, what happening in your network when you transfer that files...

Good luck,

This discussion is closed to new replies.