8 replies
by insatiable
The term is relative to the tcp/ip addressing. If you're running a private web server, for example, and it is for your intranet only, you would place it "inside" your firewall. What that means is that the web server would reside with a tcp/ip address that is the same as your internal network and the firewall protects it.
An example of that configuration could be the Axent Raptor. If the firewall is running on an NT box with two NIC cards in it, you would have one NIC configured for the inside of your firewall, ie your internal LAN, and the other NIC for the outside of your firewall, the IP address that you use when you access the internet.
The term "in front" would mean that it is on the outside of the firewall, on the internet side, rather than the internal network (behind).
I don't understand the "beside" term, unless it's meant to run on the same configuration, perhaps a sensor?
I hope that helps!! Good luck,
Melissa
Melissa, ok that helped. I realize that the scope of this ? goes beyond a forum such as this but just try to find a complete explanation of that somewhere!
The term "beside" comes out of the Windows 2000 Server Resource Kit and refers to the DMZ.
Thank you for your help.
John
by turambar386
Melissa answered the front and behind terms fine.
Although I have never heard the term 'beside' used in the context of a firewall before, I assume that it refers to what most firewall vendors refer to as a de-militarized zone (DMZ). This is usually a seperate subnet where you would host your webserver, ftp server, and any other publically accessible servers.
The DMZ is afforded some protection by the firewall, but not as much as the internal network.
Here's a diagram of sorts:==============
== Internet ==
=== (front) ==
==============
|
|
============== ==============
== FIREWALL == ----- == DMZ ==
============== == (beside) ==
| ==============
|
==============
== Internal ==
== Network ==
== (behind) ==
==============
by turambar386
by mckaytech
Actually, I think the diagram in the answer above looks pretty good!
Just to add to what has already been said, there are also a couple equivalent terms that you will find when configuring a firewall. "In front" can also be called "outside", "behind" can also be called "inside" and those are the terms that are often used when naming the interfaces on a firewall.
Usually, but not always, the terms also refer to a physical connnection as well as a logical configuration (the exception beingwhere more than one IP address is bound to the same NIC).
paul
This discussion is closed to new replies.
Trending Networks posts
Sort by Trending