Discussion Locked

First time WAN hook up at remote location. Need some help.

0 helpful
10 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

Hey everyone,
We are setting up a new LAN in remote location. I need to clear some concepts. I am setting up a 192.168.90.0 addresses on that LAN. Now I wanted to know the IP addresses on our Cisco router interfaces. The ISP has given us a WAN IP which I will set up on CSU/DSU interface. Then I also got two public IP addresses for Router and the Firewall. Now do I need a 192.168.90 address on Cisco router? I am planning on putting the Public IP that ISP has given us on eth0 interface which will connect to our firewall which in turn connects to a switch where all the equipment will be hooked up. DHCP on firewall will give out the 192 addresses to devices.
Thanks for your help.

10 replies

by deepsand

Try the "Questions" forum; the "Discussion" forum is for matters of general discussion, not specific problems in search of a solution.

Post problems such as this to the "Question" forum, rather than the "Discussion" forum. There are those who specifically seek out problems in need of a solution, and that's where they go to look for such.

Additionally there are the benefits that:

1) The "Questions" forum provides for your feedback, by way of your being able to mark "helpful" responses as such. This does not necessarily mean that a given response contained the complete solution to your problem, but only that it served to guide you toward it. This is intended to serve as an aid to those who may in the future have a problem similar to yours, so that they might have a ready source of reference available, thereby perhaps obviating the need for them to repeat questions previously asked and answered.

2) The revised TR makes it quite difficult to find both "Discussions" and "Questions" that have not had a fairly recent post, owing to some functions comingling them in the listings. By keeping each type in their respective forums, it is easier for all to find what they are looking for.

by twostar3000

Hello friends

My self prasanna from mumbai, i have one computer at my home(i.e desktop) software allready it's have web camer & one sql base software , so i have lap's , i frequently move from my home , so i want set remoter computer so is can able to exacess my web cammer and sql base software. i taken static ip address from VSNL,
i have little bit of hadware background, so can u help me out
thanks in addvance
prasanna

by naveed a

If I understand correctly. You are trying to access your home computer from outside. If that is the case, you can use remote access softwares like TightVNC and install the server on your home computer and client part of it on your laptop or other computer from where you want to access your home PC. Hope that helps

by michael kassner

I would like some more information about the topology and the actual devices, such as number of interfaces, model number etc. Especially for the CSU, router, firewall, and switch. It can be a good idea to develop a simple diagram to help the members see what you are wanting to do. This is how I see your setup.

Internet
|
>- CSU
.......|
.......>- Cisco router
.............|
.............>- Firewall
...................|
...................>- Switch for internal network

If that is incorrect, please adjust and then explain where you want to put what IP addr.

by naveed a

The topology you drew is right. Right now I have set up WAN IP address given to me by ISP on the CSU/DSU interface on the router and the two public IPs given to me on eth0/0 interface of router and WAN interface of the firewall. The setup seems fine. I am just wondering if there is anything else that I might need to add. I don't have any access lists setup. One question that I have is do i need internal ip address on the router or is it fine the way i have set it up?
Thanks

by michael kassner

I now understand the topology, but have another set of questions. Sorry, I always have questions. This batch is related to what the network is required to do now and in the immediate future. Are you hosting a website? Do you require a PoP other than the WAN interface? Any DMZ structure with public facing application servers?

Reason I ask, is that the IP addr scheme is OK as is, but it allows anyone on the Internet to get past the router and see the external interface of the firewall. If you need remote access to the firewall that is one approach, but is a potential security risk.

If public IP addrs are not required, I might suggest switching to private IP addrs right after the external interface of the router. That may be a brash statement though as I do not know all of the details or requirements of your network.

by naveed a

Thanks for all the suggestions. Well it will be a LAN with maybe 5 to 10 computers and providing them with internet access. The active directory and everything else is maintained down here in our facility(different city). So they are off site LAN which connects to us. I am setting up site to site VPN so that they can access file server and other things. Thats the whole project in a nutshell.

by cg it

use private addressing after the WAN interface. It's more secure.

Also, you don't need a whole lot of public addresses if you use many to one NAT. Just 1.

by naveed a

Yeah I have set up firewall as dhcp to give out IPs to the devices but I would need to get to firewall and router from down here so I will need router and firewall to have public IPs

by michael kassner

If you need to get to the firewall and router remotely having public IP addrs is one option. Please just remember that everyone else has that option as well. My humble approach would be to use private IP addrs and telnet into the devices through the VPN link. It adds a significant layer of security over just password protection preventing anyone from accessing the router and firewall.

This discussion is closed to new replies.