Discussion Locked

Flaky connection..a Halloween mystery

0 helpful
9 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.
Howdy. Here's the problem. Occasionally a Dell win98se laptop can't find the domain server or dhcp at work. Happens maybe every 7 days. Hub light is lit and the network card link light is lit. The traffic light flashes on boot and flashes when I attempt to renew ip's etc. Can the network card still be bad? Most of the time there isn't any problem with getting an ip or logging in. When this user goes home and connects to his cablemodem he NEVER has a problem getting an ip from the isp. I've tried moving the laptop to another connection on the network at work when no dhcp no login and it wouldn't connect. We took the laptop to his house..it connected to the isp...we took it back to work...it immediately worked fine on our network. Next..sameproblem today, so I assigned a static ip/dns/gateway and tried it. No connection from his office on multiple boots. I moved it down the hall to another office and as soon as I connected the network cable his Yahoo chat bounced on and then icq etc. This laptop is haunted. My user is a very impatient lawyer fella and I need some good advice. If it's a bad nic or maybe loose in its bay wouldn't he sometimes have the problem we have at work at home? Moving the laptop today to the other office and IMMEDIATELY connecting to the internet with his static ip when not 20 seconds before it didn't work in his office tells me logically it must be a physical problem. But if so why did my moving it to another location in the office in an earlier attempt not fix the issue? Think hard on this one.

9 replies

by ann777

Have you tried another computer in his office? I'm thinking that the wiring to his office may have an interference sort of a problem that that may be causing the inconsistent results.

As far as your last sentence/question... the time you moved it before it was without any dhcp or login ("no dhcp no login") -- it shouldn't connect if you cancel the login.

check the wiring it the users office and back it through the walls to the patch panel (or however it's wired... follow it through). Check the hub/switch for differences in programming (swap ports with a consistenly working port and see if the problem follows the cable). Check another computer at that location. etc.

by mel "blazing_saddles" dundee

i trust you are using different patch leads

Watch htew connectors on patch leads
Some RJ connectors are made for solid wire and some multistrand.

There can be problems if the wrong connectors are used on the wrong core lead

by raffi_

I have seen "geographically sensitive" computers on occasion (rare thankfully).

In one noteable instance it turned out to be interferance caused by a large walk-in refrigerator one floor beneath the client. An in another it was a power transformer on a pole outside the office window.

Anything close by generating a large amount of EM?

For troubleshooting I would try to get the machine as close to the patch panel as feasible - 1 6ft patch cord away. If it does connect reliably here the I would suspect cable at the office.

Also try and get a packet sniffer on the line. Is the box actually connecting to the server and then failing or is it not connecting at all? A cheap way to do this (if you do not have a network scanner) is use a firewall on the server that logs traffic packets - Sygate makes one.

I would also try a clean OS install - if only to eliminate the possibility that it IS the OS.

Please keep us posted on the results

Regards
Raffi_

This discussion is closed to new replies.