Discussion Locked

Help with vpn

0 helpful
7 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

Hi i just set up a small network with 6 win2k pro workstations 2 win 95 work stations and a win2k server. By next week i will be getting a cable moden in my office. Ok i have another office about 20 miles from the first office with 2 work stations one with win 2k pro the other with win 98, at that locations i will allso be using cable. Finnally i need to be able to administror both locations from either office or from home. At home i am using win 2k pro with cable a modem. I allso need to set up for 3 remote users to log in from home with some kind of high speed ccess like satilight or cable can any one help?
Please thank you in advance
if post is to long you can email me at eman714@usa.net

7 replies

by john.hall

Keep in mind that there are several options and security issues, but here are the basics of one option:
1. Setup Routing and Remote Access with PPTP on the Win2K server at location 1 and on the Win2K pro at location 2. see support.microsoft.com for articles on setup
2. For desktop support, setup PCAnywhere on the workstations and configure PCAnywhere for TCP/IP.
3. Using the native dial-up networking in Windows, your remote users connect to the W2K server and you can connect from one officeto the other by connecting to either the W2K server or the W2K pro. Once connected to the VPN you can launch PCAnywhere and connect to the workstations using TCP/IP.

Hope this helps. Search support.microsoft.com for RRAS and PPTP for answers onsetting this up.

by walterzalewski

If I read your message correctly, you have two sites that you want connected, a primary and secondary site. You also have remote users to connect to the primary site, or do they need access to both sites?

My suggestion is going with a SOHO firewall/vpn utility box solution. Check out www.watchguard.com and www.esoft.com for example. I would suggest, for the small setup that you have to try out esoft's solution, though if you want higher end, use watchguard. With either product, you can set up site to site as well as mobile users. Both have a nice feature to allow authentication through a Windows domain controller, so you can set up rights through your 2000 servers.

You can remotely administer both boxes as well with remote VPN management tools by setting yourself up as a VPN user. If you want to administer the workstations remotely, you can setup PcAnywhere, or go the 'thrift' route and use Netmeeting, which is built into Win98/2000 (including 2000 server) and provides remote desktop control similar to PcAnywhere, without the bells and whistles. Both can be used once you establish your VPN connection.

Hope that helps and good luck.

This discussion is closed to new replies.