how do I check my server is properly setup as dhcp server?
trying to fix network problem, thanks for any help
this is a followup to my earlier question re: ISP, server, router
Networks
trying to fix network problem, thanks for any help
this is a followup to my earlier question re: ISP, server, router
by mtnrunner Accepted solution
by rob miners Accepted solution
DHCP server role: Configuring a DHCP server
http://technet.microsoft.com/en-us/library/cc756865.aspx
When it is setup properly and your workstation is set to obtain an IP Address Automatically.
Open a Command Prompt on the workstation and type in ipconfig /all
This will give you a list of your connections.
Example:
Ethernet adapter Local Area Connection:
Connection-specific DNS Suffix . : minero.local
Description . . . . . . . . . . . : Marvell Yukon 88E8001/8003/8010 PCI Gigabit Ethernet Controller
Physical Address. . . . . . . . . : 00-16-E6-60-44-DC
Dhcp Enabled. . . . . . . . . . . : Yes
Autoconfiguration Enabled . . . . : Yes
IP Address. . . . . . . . . . . . : 10.20.20.22
Subnet Mask . . . . . . . . . . . : 255.255.254.0
Default Gateway . . . . . . . . . : 10.20.21.254
DHCP Server . . . . . . . . . . . : 10.20.20.1
DNS Servers . . . . . . . . . . . : 10.20.20.1
Primary WINS Server . . . . . . . : 10.20.20.1
Lease Obtained. . . . . . . . . . : Saturday, 9 August 2008 4:33:45 AM
Lease Expires . . . . . . . . . . : Sunday, 17 August 2008 4:33:45 AM
by triathlete1981 Accepted solution
what is running your dhcp. linux? windows? some linksys router?
on a workstation that's supposed to get an address, run an ipconfig /all in command prompt (if running windows) and see what shows up as dhcp. or, run an ipconfig /release and then ipconfig /renew. if you get an address, you're dhcp is okay.
This discussion is closed to new replies.
Sort by Trending