Question Locked

How to configure BGP routing on a Cisco 3560 G layer 3 switch

0 helpful
3 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.
I want to see hoe BGP is configured on a cisco 3560G switch. I am confused as to what IOS commads to use while configuring BGP

3 replies

by retro77

Configuring BGP on a layer 3 switch is the same as configuring BGP on a router. Pick up the Cisco Press book on BGP, its roughly 600 pages and will run you about $50:
http://www.bookpool.com/sm/1587051095

Then you will be a BGP God and others will bow to your very IOS command!

by roland1976

the same question. I have 3750 L3 switch i want to configure BGP in it. My ISP gave me this configuration:

Interface fa0/0.2599
Encapsulation dot1Q 2599
Ip address 172.31.41.98 255.255.255.252
No shutdown
Router bgp 64997
Neighbor 172.31.41.97 remote-as 6500
No auto-summary
This is working on router but not in L3 Switch.

This discussion is closed to new replies.