Discussion Locked

how to connect my private computers to the internet using PPPOE connection.

0 helpful
3 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

I have a 2003 server with 2 NIC's i am using PPPOE to connect to my ISP
Private NIC using 192.168.0.1
External NIC no ip address
I want my client pc inside my private lan to connect to the internet how should i setup my NIC cards and still use PPPOE.
I do not have a static address from my ISP.

3 replies

by jaqui

add the pppoe connection to the routing table, as default route to other networks.
then, when it's active, all local machines should be able to access, if you didn't deny the access with permission settings already.

by learoy.ellismoore

i have a stsatic IP address from my ISP and i also want to link that address to my server so i can use OWA and interanl exchange for clients but give them internet access. I have a linksys 300N router which has dhcp relay as an option so i wna the server to have dhcp use the router for wireless connect for laptop clients and have it acts also a switch for internal clients but all service come from the server which i need to be able to resolve external DNS request for exchange and remote access. whats your configuration inc hardware. thanks

by manspph

configure router inter name pass in connection assign local ip address such as 192.168.11.1...

in workstation setup ip address 192.168.11.3 and so on on other pc if you have more... setp default gateways same as the ip on router 192.168.11.1

confgure internet conection to use lan direct connection

This discussion is closed to new replies.