It has been a while since 3.12, you can use the INSTALL option. Create a new volume and add it to the current volume. See the following at:
http://support.novell.com/cgi-bin/search/searchtid.cgi?/2925177.htm
Procedure for adding a volume seg. in 3.1x (Last modified: 28MAY1997)
This document (2925177) is provided subject to the disclaimer at the end of this document.
--------------------------------------------------
Below is a procedure that may clarify the steps:
1. Load Install.2. Select "Volume Options" from the "Installation Options" menu.
3. From the "Volumes" list, select the volume you want to add the segment to.
4. Select the "Volume Segments" field.
A list of current segments in the selected volume will appear.
5. Press .
6. Type the number of blocks you want in the new volume segment and press . The default number is the whole area of free disk space. Remember, if you are using 4K blocks then 256K blocks will = 1MB. Example: 256000 blocks equals 1GIG.
7. Answer "Yes" at the prompt to add a new segment to the volume.
SOFTWARE CONFIGURATION
NetWare 3.11, 3.12
Document Title: Procedure for adding a volume seg. in 3.1x
Document ID: 2925177
Creation Date: 12MAY1997
Modified Date: 28MAY1997
Document Revision: 1
Novell Product Class: NetWare
Novell Product and Version: NetWare 3.12
NetWare 3.2
NetWare 4.11
DISCLAIMER
The Origin of this information may be internal or external to Novell. Novell makes all reasonable efforts to verify this information. However, the information provided in this document is for your information only. Novell makes no explicit or implied claims to the validity of this information.
Any trademarks referenced in this document are the property of their respective owners. Consult your product manuals for complete trademark informat
