This may be harder then I think but I am still going to ask. As of right now here is how the network is setup. The main office location houses a Domain controller/DHCP server. That goes to our OC-3 connection and from that goes to a dell 24 port gigabit switch. From that switch it brances out to a series of four other servers in the server room. I have three game servers connected, and a file server with around 5TB of data space. From there are about 8 workstations with Windows XP professional. That about does it for the main office location. The DHCP and domain is setup perfect, but I do not know a thing about how to get our Tucson, and Glendale, AZ locations connected to the main site. The ideal idea is for my domain controller to house all of the users and the remote sites use the same users over there instead of having to redo all of the users over and over. Also I am having problems at the main site on automatically mapping network drives to users. I am unsure of how to do that. So the main ideal senerao is this. The main Phoenix location with everthing is working minus mapped network drives. I want the Tucson location to hookup to my main site, and the Glendale location to hook up to the main site all on one domain. The Glendale location has a series of servers there also I want all to be connected directly to the domain controller. There are two 2u dell 2650’s. a Dell 1550. A custom 4u file server. I am assuming I need a domain controller over there too? If so what do I do? There are about 6 client computers over there too I want all on the same domain and all users controlled at the main domain site. Also two 4u Dells at the Tucson location. Same situation. Let me know how to proceed. I am so lost and do not know were to start. One last thing I want to make sure that the remote locations are using their own internet not tunneling through to me then using mine. I have had a problem were that is how it was before and I do not want to do it that way again. Also if possible I would like the domain/DHCP at the main location to assign IP addresses to the remote sites too. I feel that would give me more control over the company at one location. The main thing I want out of this is to be able for the remote client computers to be able to map the network drive of the 5TB storage at the main location. That is the key thing here, and make it as if everything was part of one big internal network. Thanks for yoru time. Also if you guys have any time please let me know how I can setup outlook email, the server that is running domain/dhcp is a quad xeon and can handle running an email server. My idea is to have users outside the network be able to connect to a website and login to their outlook email over the internet, I know SBS 2003 supports it, I just don’t know how to make it work. I am assuming if we get all of that working we can also use printers at remote locations so if I am at the main location I can print to a printer in Tucson? If anyone at all is willing to help with this let me know, I am also willing to let them connect through remote desktop on all of the 11 servers to configure this. Please email me or reply here at a4bigturbo@echovoice.com. Thanks. I am sorry about the long post. Let me know if it is not clear enough.