6 replies
by kwaku anim Accepted solution
by seanferd Accepted solution
but you don't provide any information on what exactly is wrong. What errors do you have? What shows up in the logs?
Did you set up anything, or did you just connect cables? Reading the documentation for Squid will probably help.
If you can provide specific errors, and there is no documentation covering this
http://www.google.com/search?ie=UTF-8&oe=utf-8&q=squid+proxy then post the error and someone can try to help.
Further, do you even have this connected correctly for your purposes according to the documentation? Note that the server and/or clients will need to be configured to use the Squid server as well.
by kwaku anim Accepted solution
1. i connected the DSL to the eth0 ie the NIC on the mother board. and configured it with the ADSL-Setup command.
2. i connected the LAN to eth1 ie a NIC i added to the machine.
Actually this is how i want my connection to be.so i can make the squid port transparent.
what is really happening is if connect a cable to eth1 it browses alright but if i connect eth0 it does not browse.i wish i can make both NIC work.
by tobif Accepted solution
I get a feeling that either BIOS or your OS has some kind of priority system, where a connection made to an external NIC will disable the built-in.
You could check if the BIOS has any strange settings regarding ethernet ports.
Also check you didn't skip any steps in setting up the router settings.
by oldbaritone Accepted solution
by kwaku anim Accepted solution
This discussion is closed to new replies.
Trending Networks posts
Sort by Trending